Specifications

26
Â
SENC 50
Incremental linear encoder
Extremely compact dimensions•
Measuring steps 5 µm to 0.5 µm•
ML (mm) LL (inch) L L1 L2 Qty. B
50 1 143.5/5.65“ 20.96/0.825“ 101.6/4“ 2x
75 2 168.9/6.65“ 20.96/0.825“ 127.0/5“ 2x
100 3 194.3/7.65“ 33.66/1.325“ 127.0/5“ 2x
125 4 219.7/8.65“ 46.36/1.825“ 127.0/5“ 2x
150 5 245.1/9.65“ 59.06/2.325“ 127.0/5“ 2x
175 6 270.5/10.65“ 71.76/2.825“ 127.0/5“ 2x
200 7 295.9/11.65“ 84.46/3.325“ 127.0/5“ 2x
225 8 321.3/12.65“ 97.16/3.825“ 127.0/5“ 2x
250 9 346.7/13.65“ 46.36/1.825“ 127.0/5“ 3x
275 10 372.1/14.65“ 59.06/2.325“ 127.0/5“ 3x
300 11 397.5/15.65“ 71.76/2.825“ 127.0/5“ 3x
325 12 422.9/16.65“ 84.46/3.325“ 127.0/5“ 3x
350 13 448.3/17.65“ 97.16/3.825“ 127.0/5“ 3x
375 14 473.7/18.65“ 46.36/1.825“ 127.0/5“ 4x
425 16 524.5/20.65“ 71.76/2.825“ 127.0/5“ 4x
475 18 575.3/22.65“ 33.66/1.325“ 254.0/10“ 3x
525 20 626.1/24.65“ 59.06/2.325“ 254.0/10“ 3x
ML = Measuring length
P = Gauging points for alignment
s = Beginning of measuring length
k = Required mating dimensions
À = M4 nut usable
Á = For aligning the back-up spar
 = Direction of scanning head motion for
output signals in accordance with interface
description