Specifications

24
Linear Encoders
– for Manually Operated Machine Tools
For typical applications on manual machine
tools such as milling machines or lathes,
display steps of 10 µm are suffi cient.
This is provided by the linear encoder of
the SENC 50 and SENC 150 series without
interpolation.
Jig boring machines, grinding machines,
and measuring and inspection tasks
normally require display steps of 1 µm
and better. The SENC 50 and SENC 150
with integral 5-fold or 10-fold interpolation
are suitable for these higher requirements.
For limited installation space, for
example on the slide of a lathe, the SENC
50 linear encoder may be the best solution.
The SENC 150 linear encoders are used as
universal linear encoders under normal
mounting conditions.