Specifications

22
Interfaces
– Digital Readouts
Pin layout of encoders « TTL
Mating connector:
9-pin D-sub connector (male)
Power supply Incremental signals Others
762345891
« TTL U
P
0 V U
a1

U
a2
£
U
a0
¤
/
Shield on housing; U
P
= Power supply voltage
200S/300S
KT 130 edge fi nder
(only 200S, 300S)
A 15-pin D-sub connection is provided for
the KT 130 edge fi nder.
The trigger signal of the edge fi nder can
also start data output (adjustable by
parameter).
Edge fi nder with contact
triggering (only 200S, 300S)
Edge fi nders that operate according to the
contacting principle can be connected
through a 3.5 mm phone jack.
Pin Assignment
65 V
1 0 V (internal shield)
80 V
2 Readiness
13 Trigger signal
Remaining pins Do not assign
Housing External shield
or