Specifications

16
Accessories
– Edge Finder
KT 130 edge fi nder
For any workpiece materials
With spiral cable
ID 283 273-S1
The KT 130 is a 3-D triggering edge fi nder.
This means it can also be used for
nonconducting materials. The stylus is
defl ected when it contacts the workpiece,
and the edge fi nder sends a triggering
signal over the connecting cable to the
200S or 300S digital readout.
The KT 130 edge fi nder allows you to set
reference points quickly and easily, without
leaving marks on the workpiece.