Specifications

12
200S
– Flexible Digital Readout for Two or Three Axes
The ACU-RITE 200S digital readout is
especially suited for use on milling, drilling
and boring machines and lathes with up to
three axes. A separate I/O unit provides
switching input/outputs for simple tasks in
automation.
Description
The 200S display unit is designed as a
sturdy upright unit with splash-proof full-
travel keypad for use in a workshop. It is
equipped with a monochrome fl at screen
for position values, dialog and input
displays, graphic functions and graphic
positioning support.
Functions
The 200S display unit is characterized by its
plain language dialog guidance. The
distance-to-go display facilitates
positioning. You approach the next position
quickly and reliably by simply traversing
until the display reads “zero”. The functions
for each application are easily activated by
parameter input. Special functions are
available for producing hole patterns
(linear patterns and circular patterns).
Datums can be determined quickly and
accurately with an edge fi nder. The 200S
readout supports you with special probing
functions.
You can easily switch between radius and
diameter display when the position display
is confi gured for turning. The readout also
offers support for lathes with separate top
slide: The sum display feature allows you
to display the saddle and top slides
together or separately. To set a datum,
touch the workpiece and freeze the tool
position. Then retract and measure the
workpiece.
Data interfaces
The 200S features an RS-232-C/V.24 serial
interface for measured value transfer to a
PC or printer, for input/output of parameters
and compensation value lists, and for
diagnostics.