Specifications

11
VUE
Axes*
2 or 3 from A to Z and Z
O
Encoder inputs
«
TTL
Display step
1)
Adjustable, max. 7 digits
Linear axis: 1 mm to 0.000 1 mm
Angular axis: 1° to 0.001° (00° 00‘ 01“)
Display
5.7” monochrome fl at-panel display for position values, dialogs and inputs, and soft keys
Status display Tool, reference point, operating function, feed rate, ABS/INC, mm/inch, stopwatch
Functions
10 datums•
16 tools•
REF reference-mark evaluation for distance-coded or single reference marks•
Distance-to-go mode•
Scaling factor•
mm/inch switching•
Absolute-incremental display•
On-screen help and operating instructions•
Graphic positioning support (Near Zero warning)•
Calculator•
For milling/drilling/boring Calculation of positions for hole patterns (circular patterns as well as linear patterns)•
Tool radius and tool length compensation•
Probing functions for reference-point acquisition with KT edge fi nder: “Edge”, “Centerline” and •
“Circle center”
Oblique line, circular arc•
Linear hole patterns, bolt hole circles•
For turning Taper calculator•
Radius/diameter switching•
Freezing the tool position for back-off•
Vectoring: X/Y display of the traverse path with inclined top slide•
Sum displays for Z and Z•
O
(axis coupling)
Error compensation
Axis error:• Linear and multipoint over up to 200 points
Backlash compensation:• for compensation of reversal error
Data interface
USB type B connector; up to 115 200 baud
Accessories
Base, mounting arms, mounting frame
Main power input
100 V AC to 240 V AC (–15 % to +10 %), 47 Hz to 63 Hz; 25 W
Operating temperature
0 °C to 45 °C
Protection EN 60 529 IP 40, front panel IP 54
Weight
2.6 kg
* Please select when ordering
1)
Depends on the signal period of the connected encoder