User`s manual

200S 55
II - 3 Installation and Electrical Connections
II - 3 Installation and Electrical
Connections
Installation
The DRO is mounted to a tilt/swivel feature: See "DRO Dimensions"
on page 63.
Electrical requirements
Voltage 100 - 240 Vac
Power 30 VA max.
Frequency 50/60 Hz (+/- 3Hz)
Fuse 630 mA/250 Vac, 5 mm x 20 mm, Slo-Blo (line and
neutral fused)
Environmental
Operating temperature 0° to 45°C (32° to 113°F)
Storage temperature -20° to 70°C (-4° to 158°F)
Mechanical weight 2.6 kg (5.2 lb.)
Protective earthing (grounding)
Preventative maintenance
No special preventative maintenance is necessary. For cleaning, wipe
lightly with a dry lint-free cloth.
It is necessary to connect the protective conductor
terminal on the rear panel to the star point of machine
ground as shown in figure to the right.