200S READOUTS REFERENCE MANUAL
200S Key Layout 1 2 3 4 5 6 7 8 Display Area Soft keys Power Indicator light Arrow Keys: Use the UP/DOWN keys to adjust the screen contrast. Axis Keys Numeric Keypad ENTER key CLEAR key 61 1 51 81 3 21 71 41 200S Soft keys There are multiple pages of soft key functions to select from the operating modes. Use the LEFT/RIGHT arrow keys -4- to cursor through each page. The page indicator in the Status Bar will show the page orientation. The darkened page indicates the page you are currently on.
Soft Key function (Page 2) Soft key Press to select the Circle Pattern, Linear Pattern, Incline Mill, or Arc Mill table. This function is for Milling applications only (page 28). This soft key toggles between radius and diameter displays. This function is for Turning applications only (page 41). Soft Key function (Page 3) Opens the Job Setup menu and provides access to the Installation Setup soft key (page 11). Press when ready to identify a reference mark (page 9).
Readout Parameter Access Code An access code must be entered before machine-related installation parameters can be set or changed. This prevents inadvertent adjustments to the installation setup parameters. IMPORTANT! The access code is 8891. Access to Machine Parameter Operations Refer to the Setup section also. Begin by pressing the SETUP soft key. Press the soft key INSTALLATION SETUP. Press the access code numbers 8891 using the numeric key pad.
iv
Introduction Software Version The software version is shown on the initial power up screen. This User's Manual covers the functions of the 200S for both milling, and turning applications. Operational information is arranged in three sections: General Operations, Mill Specific Operations, and Turn Specific Operations. 200S DRO axis availability. The 200S DRO is available in two, and three axis form. The 3 axis 200S DRO is used through out this manual for illustration, and description of function keys.
vi
Hassle-Free Warranty ACU-RITE Companies, Inc. is proud to offer the 3-Year Hassle-Free Warranty for all digital readout systems, vision readout systems, and precision glass scales. This warranty will cover all of the ACU-RITE repair and replacement costs for any readout or precision glass scale returned during the three (3) year warranty period. ACU-RITE will repair or replace the damaged components - regardless of the product’s condition absolutely free, no questions asked.
viii
Table of Contents 200S Key Layout ........................................................................................................i 200S Soft keys...........................................................................................................i Readout Parameter Access Code Access to Machine Parameter Operations .............................................................. iii Introduction Software Version .................................................................................
Measured Value Output.................................................................................... 13 Near Zero Warning............................................................................................ 13 Status Bar Settings ........................................................................................... 14 Job Clock .......................................................................................................... 14 Remote Switch .........................................
I - 4 Turning Specific Operations Tool Display Icon............................................................................................... 36 Tool Table.......................................................................................................... 36 Setting Tool Offsets.......................................................................................... 36 Datum Setting...................................................................................................
II - 4 I/O Connections Pin layout for Electronic Edge Finder ................................................................ 56 Wiring the Serial communication cable ............................................................ 57 II - 5 Remote Switch Data Output Data output using external signals.................................................................... 58 Data output using Edge Finder .........................................................................
Operating Instructions 1
I - 1 Fundamentals of Positioning I - 1 Fundamentals of Positioning Datums The workpiece drawing identifies a certain point on the workpiece (example: “a corner”) as the absolute datum, and perhaps one, or more other points as relative datums. The datum setting procedure establishes these points as the origin of the absolute, or relative coordinate systems. The workpiece, which is aligned with the machine axes, is moved to a certain position relative to the tool.
I - 1 Fundamentals of Positioning Absolute Workpiece Positions Each position on the workpiece is uniquely identified by its absolute coordinates. Example: Absolute coordinates of position 1: X = 20 mm Y = 10 mm Z = 15 mm If you are drilling, or milling a workpiece according to a workpiece drawing with absolute coordinates, the tool is moving to the value of the coordinates. Incremental workpiece positions A position can also be referenced to the preceding nominal position.
I - 1 Fundamentals of Positioning Zero Angle Reference Axis The Zero Angle Reference Axis is the 0.0° position. It is defined as one of the two axes in the plane of rotation. The following table defines the Zero Angle where the position of the angle is zero for the three possible planes of rotation.
I - 1 Fundamentals of Positioning Encoder Reference Marks Encoders normally contain one or more reference marks which the 200S Reference Mark Evaluation feature uses to re-establish datum positions after a power interruption. There are two main options available for reference marks; fixed and distance-coded.
I - 2 General Operations for 200S I - 2 General Operations for 200S Screen Layout 1 1 2 3 4 5 6 7 8 9 10 11 12 13 Datum Tool Feed Rate Job Clock Unit of Measure Operating Modes Page Indicator Set/Zero Axis Labels Ref Symbol Soft key Labels Display Area Near Zero Warning (In Distance-To-Go mode only) 2 4 3 5 6 1 7 8 10 12 9 13 11 ACU-RITE’s 200S readout provides application-specific features that allows you to obtain the most productivity from your manual machine tools.
I - 2 General Operations for 200S General Navigation Use key pad to enter numeric values within each field. The ENTER key will confirm the entry within a field, and return to the previous screen. Press the C key to clear entries, and error messages, or return back to the previous screen. SOFT KEY lables show the various milling, or turning functions. These functions are selected by pressing the corresponding soft key directly below each soft key label.
I - 2 General Operations for 200S Reference Mark The 200S reference mark feature automatically re-establishes the relationship between axis slide positions, and display values last defined by the datum setting following a power cycle. (1) First time power up require these values to be defined along with all initial DRO setting. Press the NO REF softkey, and use the RIGHT, or LEFT arrow keys to enter SETUP.
I - 2 General Operations for 200S Working without reference mark The 200S can also be used without crossing over the reference marks. Following a power cycle, do not move any axes. Press the NO REF soft key to exit the reference mark routine, and continue. The 200S can still cross over reference marks at a later time. Such as if it becomes necessary to define a datum that can be re-established after a power interruption. Press the ENABLE REF soft key to activate the position recovery routine.
I - 2 General Operations for 200S Operating Modes The 200S has two operating modes: Distance-To-Go (INCREMENTAL), and Actual Value (ABSOLUTE). The Actual Value mode always displays the current actual position of the tool, relative to the active datum. In this mode, all moves are done by traveling until the display matches the nominal position that is required. The Distance-To-Go feature enables you to approach nominal positions by traversing to display value zero.
I - 2 General Operations for 200S Setup 200S offers two categories for setting up operating parameters. These categories are: JOB SETUP ,and INSTALLATION SETUP. The JOB SETUP parameters are used to accommodate specific machining requirements for each job. INSTALLATION SETUP is used to establish encoder, and display parameters. In this section, the JOB SETUP parameters are provided.
I - 2 General Operations for 200S Scale Factor The scale factor may be used to scale the part up or down. A scale factor of 1.0 creates a part with the exact size as dimensioned on the print. A scale factor >1 “grows” the part, and <1 “shrinks” the part. The following probing soft key functions are available: The numeric keys are used to enter a number greater than zero. The number range is 0.1000 to 10.000. A negative value may also be entered.
I - 2 General Operations for 200S Diameter Axes Select Diameter Axes to bring up the diameter screen shown here to set which axes can be displayed in either radius or diameter values. ON indicates that the axis position will be displayed as a diameter value. When OFF, the Radius/Diameter feature does not apply. For turning applications see "Radius/Diameter Soft Key" on page 41 for the Radius/Diameter feature. Cursor to Diameter Axes, and press ENTER. The cursor will be in the X axis field.
I - 2 General Operations for 200S Status Bar Settings The Status Bar is the segmented bar at the top of the screen which displays current datum, tool, feed rate, job clock and page indicator. Press the ON/OFF soft key for each setting you want to see displayed. Job Clock The job clock shows the hours (h), minutes (m), seconds (s). It operates like a stop watch showing elapsed time. The clock starts timing from 0:00:00. The elapsed time field shows the total accumulated time from each interval.
I - 2 General Operations for 200S While in the Zero Field, press the appropriate axis keys to enable or disable zeroing of the axis display positions when the switch is closed. While in the Next Hole Field, press the ON/OFF soft key to ON to move to the next hole within a pattern. Console Adjustment The LCD’s brightness and contrast can be adjusted either by using the soft keys in this form, or by using the UP/DOWN arrow keys on the keypad in either operating mode.
I - 2 General Operations for 200S Viewing the main operating screen: Set/Zero Soft Key The SET/ZERO soft key [1], is a toggle key that determines the effect of pressing an axis key [2]. Pressing the SET/ZERO soft key switches the functionality between “SET”, and “ZERO” [3]. 3 2 1 The current setting is indicated in the Status Bar [3].
When the setting is “ZERO” in the Distance-To-Go mode “INC”, the current Distance-To-Go value will automatically set to zero when an axis key is pressed. 2 Actual Value mode [ABS] When the setting is “SET”, and in Actual Value mode “ABS”, pressing an axis key opens the DATUM form for the selected axis. The value shown is the previous datum value entered. New datum values can now be entered.
I - 3 Milling Specific Operations I - 3 Milling Specific Operations This section discusses operations, and soft key functions specific to milling applications only. Soft Key Functions Tool Soft Key The TOOL soft key opens the tool table, and provides access to the Tool form for entering a tool’s parameters. The 200S can store up to 16 tools within the tool table.
I - 3 Milling Specific Operations Tool Compensation This allows workpiece dimensions directly from the drawing to be entered. R represents the tool radius, and examples of the R values are shown here. The displayed distance to go is then automatically lengthened R+, or shortened R- by the value of the tool radius. For more information see "Presets" on page 23. The length offset may be entered as a known value, or the 200S may determine the offset automatically.
I - 3 Milling Specific Operations Calling the Tool from the Tool Table To call a tool, press the TOOL soft key. Use the UP, or DOWN arrow keys to cursor through the selection of tools (1-16). Select the tool required by highlighting that tool. Verify in the status bar that the proper tool has been called. Press the C key to exit. Datum Soft Key Datum settings define the relationships between the axis positions, and the display values.
I - 3 Milling Specific Operations Probing with a Tool If using a tool, or non-electrical edge finder to set datum points, the 200S probing functions can still be used. Datum points can be set by touching the edges of a workpiece, one after the other with a tool, and then manually entering the tool’s position as datum points.
I - 3 Milling Specific Operations Example: Probe workpiece edge and set edge as datum Preparation: Set the active tool to the tool that will be used to set the datum. An end mill is shown in this example, along with the Set Datum screen. Datum axis: X =0 Tool diameter D = 0.25” Press DATUM. Press the Down arrow key until the X axis field is highlighted. Press PROBE soft key. Press EDGE soft key. Touch workpiece edge.
I - 3 Milling Specific Operations Presets The Preset function is used to indicate the nominal (target) position for the next move. Once the new nominal position information is entered, the display will switch to Distance-To-Go mode. It will show the distance between the current position and the nominal position. Now the table only needs to move until the display is zero, and will be at the required nominal position.
I - 3 Milling Specific Operations Preparation: Select the tool with the appropriate tool data. Pre-position the tool to an appropriate location (such as X = Y = -1”). Move the tool to milling depth. Pressthe PRESET soft key. Press the Y axis key -ALTERNATIVE METHOD Press the SET/ZERO soft key so that you are in Set mode. Press the Y axis key. Enter nominal position value for corner point 1: Y = 1”, and select tool radius compensation R + with R+/- soft key.
I - 3 Milling Specific Operations Incremental Distance Preset Example: Drilling by traversing to display value zero with incremental positioning. Enter the coordinates in incremental dimensions. These are indicated in the following (and on the screen) with a preceding I (Incremental). The datum is the workpiece zero. Hole 1 at: X = 1” / Y = 1” Distance from hole 1 to hole 2: XI = 1.5” / YI = 1.5” Hole depth: Z = –0.
I - 3 Milling Specific Operations To preset the location for Hole 2: Press the PRESET soft key. Press the X axis key. Enter nominal position value for hole 2: X = 1.5”, mark your input as an incremental dimension, press the I soft key. Press the Y axis key. Enter nominal position value for hole 2: Y = 1.5”, mark your input as an incremental dimension, press the I soft key. Press ENTER. Traverse the X and Y axes until the display value is zero.
I - 3 Milling Specific Operations Circle, and Linear Patterns This section describes the hole pattern functions for Circle and Linear patterns. Press the CIRCLE, or LINEAR PATTERN soft keys to access the Pattern function, then enter the required data. The 200S calculates the positions of all the holes, and displays the pattern graphically on the screen. The 200S provides one user definable pattern each for Circle, and Linear pattern. They can be recalled, and executed from the DRO anytime during operation.
I - 3 Milling Specific Operations Circle, and Linear Pattern Form The Circle, or Linear Pattern form is used to define one circle hole pattern (Full, or Segment), and one linear hole pattern (Array, or Frame). Access the Pattern Form from the DRO soft key menu by first pressing the LEFT/RIGHT arrows until the FEATURES soft key is shown. Press the FEATURES soft key, then select CIRCLE PATTERN, or LINEAR PATTERN by pressing it’s soft key.
I - 3 Milling Specific Operations Linear Pattern Information Required Type: type of pattern, ARRAY or FRAME. First Hole: location of the first hole of the pattern. Holes per Row: number of holes in each row of a pattern. Angle: the angle, or rotation of the pattern. Depth: the target depth for drilling in the tool axis. Number of Rows: the number of rows in the pattern. Row Spacing: the spacing between each row of the pattern.
I - 3 Milling Specific Operations Incline, and Arc Milling This section describes the incline, and arc milling features. They provide ways to machine a flat diagonal surface (incline milling), or a rounded surface (arc milling) using a manual machine. This section describes the Incline, and Arc Mill entry form, and capabilities. The 200S provides one user definable pattern each for Incline, and Arc patterns. They can be recalled, and executed from the DRO anytime during operation.
I - 3 Milling Specific Operations Incline, and Arc Milling The Incline, or Arc Mill entry form is used to define one Incline, and Arc pattern. Access the Mill entry form from the DRO soft key menu by first pressing the LEFT/RIGHT arrows until the FEATURES soft key is shown. Press the FEATURES soft key, then select INCLINE MILL, or ARC MILL by pressing it’s soft key. Press the UP/DOWN arrow keys to define a new pattern, or edit the current pattern. Press the RUN soft key to run the pattern.
I - 3 Milling Specific Operations Incline, and Arc Milling form entry The following soft keys are available while in the entry form. Function Soft key Press to select a plane ([XY], [YZ], or [XZ] Press to execute the milling operation Press to use the current absolute position Incline Milling The Incline Milling form is used to specify the flat surface to be milled. The data is entered through this form. Data input will allow this feature to be defined. The following fields require data input.
I - 3 Milling Specific Operations Arc Milling The Arc Milling form is used to specify the curved surface to be milled. The data is entered through this form, and will allow this feature to be defined. The following listed fields require data input. Plane Selection: Select the plane by pressing the PLANE soft key. The current selection is shown on the soft key, and in the plane field. The graphic in the message box aids in selecting the correct plane.
I - 3 Milling Specific Operations Incline, and Arc Mill Execution To execute a milling operation, select the feature using the corresponding soft key to open the entry form. Press the RUN soft key. The screen switches to the incremental DRO view, showing the incremental distance from the start point. The following soft keys are available while running an Incline, or Arc Milling feature.
To follow the contour, move the two axes in small steps, keeping the X, and Y positions as close to zerro (0.0) as possible. When no step size is specified, the incremental display always shows the distance from the closest point on the arc. Press the VIEW soft key to toggle through the three available views (incremental DRO, contour, and absolute DRO). The contour view shows the position of the tool relative to the milling surface.
I - 4 Turning Specific Operations I - 4 Turning Specific Operations This section discusses operations specific to turning applications only. Tool Display Icon The Ø icon is used to indicate that the displayed value is a diameter value. No icon visible indicates that the display is a radius value. Tool Table The 200S can store the dimensional offsets for up to 16 tools. When a work piece is changed, and a new datum is established, all tools are automtically referenced from the new datum.
Press the ENTER key. Select the axis (X) key. Enter the position of the tool tip, for example, X= Ø .100”. Remember to ensure the 200S is in diameter display mode (Ø) if the input is a diameter value. Touch the workpiece face with the tool (1). Cursor to the Z axis (2), then set the position display for the tool tip to zero, Z=0. Press ENTER.
I - 4 Turning Specific Operations Press the LOCK AXIS soft key while the tool is still cutting. Retract from the current position. Turn the spindle off, and measure the workpiece diameter. Enter the measured diameter, or radius, and press ENTER. Remember to ensure the 200S is in diameter display mode Ø if you input a diameter value. Datum Setting See "Datum Soft Key" on page 20 for basic information. Datum settings define the relationships between the axis positions and the display values.
I - 4 Turning Specific Operations Press the DOWN arrow key to advance to the Z axis. Touch the workpiece surface at point 2. Enter the position of the tool tip (Z= 0) for the Z coordinate of the datum. Press ENTER. Setting Datums using LOCK AXIS Function The LOCK AXIS function is useful for setting a datum when a tool is under load and the diameter of the workpiece is not known. To use the LOCK AXIS function: Press the DATUM soft key. The cursor will be in the DATUM NUMBER field.
I - 4 Turning Specific Operations Taper Calculator Soft Key Use the taper calculator to calculate taper angle. Refer to screen examples on the right. You can calculate tapers either by entering dimensions from a print, or by touching a tapered workpiece with a tool or indicator. Entry values: For the taper ratio, calculation requires: Length of the taper Change in the radius of the taper.
I - 4 Turning Specific Operations Presets The functionality has been explained previously in this manual (see "Presets" on page 23). The explanation, and examples on those pages are based on a mill application. The basics of those explanations are the same for turning applications with two exceptions; Tool Diameter Offsets (R+/-), and Radius vs. Diameter inputs. Tool diameter offsets have no applications with turning tools, so this functionality is not available while doing turning presets.
I - 4 Turning Specific Operations Vectoring Vectoring breaks down the movement of the compound axis into the crossfeed or longitudinal axes . If you are turning threads, for example, vectoring lets you see the diameter of the thread in the X-axis display, even though you are moving the cutting tool with the compound axis handwheel. With vectoring enabled, you can preset the desired radius or diameter in the X-axis, so that you can “machine to zero”.
I - 4 Turning Specific Operations Enabling Z0, and Z Coupling To couple the Z0, and Z axes and have the result displayed on the Z0 display, press and hold the Z0 key approximately 2 seconds. The sum of the Z positions will be displayed on the Z0 display and the Z display will be blanked. To couple the Z0, and Z axes and have the result displayed on the Z display, press and hold the Z key for approximately 2 seconds.
44 I I - 4 Turning Specific Operations
Technical Information 45
II - 1 Installation Setup II - 1 Installation Setup Installation Setup Parameters To locate the Installation Setup screen from the normal operating display: Press the RIGHT, or LEFT arrow key until the SETUP soft key is displayed Press the SETUP soft key. The Job Setup screen is now displayed, and the INSTALL. SETUP soft key is displayed. Press the INSTALL. SETUP soft key, and enter the passcode. The Installation Setup screen is now displayed.
Select the encoder type by pressing the LINEAR/ROTARY soft key. Arrow down to the RESOLUTION field. Press COARSER, or FINER soft keys when using linear encoders to select the encoder’s resolution in µm (10, 5, 2, 1, 0.5). The exact resolution can also be typed in using the numeric key pad. Rotary encoders require the number of counts per revolution to be entered using the numeric key pad. II - 1 Installation Setup Arrow down to the REFERENCE MARK field.
II - 1 Installation Setup Display Configuration The Display Configuration form is where which axes can be selected for display, and in what order. The following additional setups are also available. Scroll to the desired display, and press ENTER. Press the ON/OFF soft key to turn the display on, or off. Press the LEFT, or RIGHT arrow key to select the axis label. Scroll to the Input field. Press the numeric key associated with the encoder input on the back of the unit.
II - 1 Installation Setup Linear Error Compensation Linear error compensation can be applied, if the results of the comparison with a reference standard show a linear deviation over the whole measuring length. In this case the error can be compensated by the calculation of a single correction factor.
II - 1 Installation Setup Starting a Non-Linear Error Compensation Table Select Non-linear by pressing the TYPE soft key. To start a new error compensation table, first press the EDIT TABLE soft key. All correction points (up to 200) are equally spaced from the start point. Enter the distance between each of the correction points. Press the DOWN arrow key. Enter the table’s start point. The start point is measured from the scale’s reference point.
II - 1 Installation Setup Viewing the Compesation Table Press the EDIT TABLE soft key. To switch between the table and graph views, press the VIEW soft key. Press the UP, or DOWN arrow keys or the numeric keys to move the cursor within the table. The error compensation table data may be saved to or loaded from a PC via the Serial port. Exporting the current Compensation Table Press the EDIT TABLE soft key. Press the IMPORT/EXPORT soft key. Press the EXPORT TABLE soft key.
II - 1 Installation Setup Serial Port A printer or computer may be connected to the serial port. Job, and Installation Setup parameters may be sent to a printer or computer. Remote commands, remote key codes, and Job, and Installation Setup parameters may be received from a computer. The BAUD Field can be set to 300, 600, 1 200, 2 400, 9 600, 19 200 38 400, 57 600, or 115 200 by using the soft keys. The parity can be set to NONE, EVEN, or ODD using the LOWER, or HIGHER soft key.
II - 1 Installation Setup The Position Recall feature, when it is “ON”, will store the last position of each axis when power was turned off, and then redisplay that position once power is turned back on. Note that any movement that occurs while power is off will be lost. Whenever power has been off it is recommended to re-establish workpiece datums using the Reference Mark procedure, see page 8. Diagnostics The DIAGNOSTICS provides access for testing the keypad, and edge finders.
II - 2 RS-232C Serial Communications II - 2 RS-232C Serial Communications Serial port The RS-232-C/V.24 serial port is located on the rear panel. The following devices can be connected to this port: Printer with serial data interface. Personal computer with serial data interface. For operations that support data transfer, an IMPORT/EXPORT soft key is available. See "Import/Export" on page 15.
II - 3 Installation and Electrical Connections II - 3 Installation and Electrical Connections Installation The DRO is mounted to a tilt/swivel feature: See "DRO Dimensions" on page 63. Electrical requirements Voltage 100 - 240 Vac Power 30 VA max. Frequency 50/60 Hz (+/- 3Hz) Fuse 630 mA/250 Vac, 5 mm x 20 mm, Slo-Blo (line and neutral fused) Environmental Operating temperature 0° to 45°C (32° to 113°F) Storage temperature -20° to 70°C (-4° to 158°F) Mechanical weight 2.6 kg (5.2 lb.
II - 4 I/O Connections II - 4 I/O Connections Encoders are plugged into connectors marked Inputs 1, 2, & 3. Pin layout for Electronic Edge Finder Pin Assignment 1 0V (Inner shield) 2 Stand By 3 15 Pin receptacle connector for Edge Finder.
II - 4 I/O Connections Wiring the Serial communication cable The wiring of the serial communication cable depends on the device being connected (see technical documentation for external device) Pin layout of RS-232-C / V.24 data interface.
II - 5 Remote Switch Data Output II - 5 Remote Switch Data Output The remote switch (pendant or footswitch), or Ctrl B (sent over serial interface), will transmit the currently displayed values in either Actual Value or Distance-To-Go mode, whichever is currently visible. Data output using external signals Example 1: Linear axis with radius display X = + 41.29 mm X = + 41 .
C = + 1260 . 0000 1 2 3 4 5 6 7 1 Coordinate axis 2 Equal sign 3 +/– sign 4 4 to 8 places before the decimal point 5 Decimal point 6 0 to 4 places after the decimal point 7 Blank space 8 9 W for angle (in distance-to-go display: w Carriage return 10 Blank line (Line Feed) W 8 9 10 II - 5 Remote Switch Data Output Example 2: Rotary axis with degrees decimal display C = + 1260.
II - 5 Remote Switch Data Output 7 Colon 8 9 0 to 2 places seconds Blank space 10 11 W for angle (in distance-to-go display: w Carriage return 12 Blank line (Line Feed) Data output using Edge Finder In the next three examples, measured value output is started with a switching signal from the edge finder. Printing capability can be turned on, or off in the Job Setup parameter Measured Value Output. Information from here is transmitted from the selected axis.
II - 5 Remote Switch Data Output Example 5: Probing function Centerline Coordinate of centerline on X axis CLX = + 3476.9963 mm (Center Line X axis) Distance between the probed edges DST = 2853.0012 mm (Distance) CLX : DST : 1 + 3476 . 9963 R 2853 .
II - 5 Remote Switch Data Output Example 6: Probing function Circle Center First center point coordinate, e.g. CCX = –1616.3429 mm. Second center point coordinate, e.g. CCY = +4362.9876 mm, (Circle Center X axis, Circle Center Y axis; coordinates depend on working plane). Circle diameter DIA = 1250.0500 mm CCX : - 1616 . 3429 R CCY : + 4362 . 9876 R DIA : 1250 .
II - 6 Dimensions II - 6 Dimensions DRO Dimensions Dimensions in inches/mm Top view with Dimensions Front view with Dimensions Back view Bottom view with Dimensions 200S 63
64 I II - 6 Dimensions
A absolute coordinates 3 Absolute Distance Preset 23 Absolute Workpiece Positions 3 Actual Position, Nominal Position, and DistanceTo-Go 2 Actual Value/Distance-To-Go soft key 10 Arc Milling 33 Axis Labels 6 B Backlash Compensation 51 C Calling a Tool from the Tool Table (Turning) 36 Circle, and Linear Pattern Table Entry 28, 31 Circle, and Linear Patterns 27 Console adjustment 15 Counter Settings 52 D Datum Soft Key - Turning 38 Datum soft key (Milling) 20 Datums 2 Diagnostics 53 Diameter Axes (Milling) 13
S Scale factor 12 Screen Layout 6 Set Zero soft key 16, 17 Setting Tool Offsets 36 Setup 11 Setup soft key 11 Soft key Labels 6 Status Bar 6, 14 T Taper Calculator - Turn 40 Tool Compensation - Mill 19 Tool Soft Key 18 Tool Table - Mill 18 Tool Table (Turning) 36 Turning Specific Operations 36 U Units of measurement, setting 11 V Vectoring 42 Z Z Coupling - Mill 42 Zero Angle Reference Axis 4
Acu-Rite Companies Inc. is an ISO 9001 CERTIFIED MANUFACTURER Acu-Rite Companies, Inc.
