Datasheet

FirgelliLinearActuatorAccessories–DPDTSwitchKit
Use this kit to connect your –S type linear actuator to a voltage source and be able to control the direction
manually. This switch will return to the middle or off position when released. Simply push the switch one
direction to extend and the other direction to retract. The included fuse will protect the circuit from shorts
and overloading. Not included in this kit, is the required power supply (6 or 12volts DC). You may also
require more wire so you can position the switch the required distance from the actuator.
Contents:
• 1DPDTswitch
• 6crimpconnectors
• 1fuse
• 40cmof2conductorwire
• 4piecesofheat‐shrink

ForUseWith:
• PQ12–Sactuators
• L12–Sactuators
• L16–Sactuators

SuggestedWiringSchematic:



Notes:
• For more details on each component see: www.firgelli.com/pdf/accessories.pdf
• To connect a PQ12 actuator, use pins 2 & 3 on the PQ12 connector.