User's Manual

NOTE: If diagnostic trouble codes (DTCs) are already being

displayed from a previous read operation, press and hold

READ/Scroll Down key for 3 seconds and release.

6.Observe a Moving

on Display.

NOTE: If a No Link message

displays, cycle ignition key to

the OFF position for 10

seconds, then back ON and repeat Reading Diagnostic

Data.

7. View Codes on Display

NOTE: If there are no codes present,

the tool will display 0

Codes and proceed to

display MIL Status when READ/Scroll Down is

pressed.

 To View Codes press and

release READ/Scroll

Down key.

 If the code is a Pending

Code a , will be displayed.

No Link

P0443

P0452

0 Codes9

3 Codes9