User's Manual

5.Press and Hold ERASE Key for

3 Seconds and Release.

6.Observe ERASE? Displays.

7.Press and Hold ERASE Key

for 3 Seconds and Release.

8.Observe a Moving

on Display.

NOTE: If a NO LINK message

displays, cycle ignition key to

the OFF position for 10

seconds, then back ON, and

repeat Erasing Diagnostic Data.

9.Observe DONE Displays.

NOTE: If the problem causing Diagnostic Trouble Code(s) still

exists, the code will return. The Diagnostic Trouble

Code may return immediately or may return after vehicle

has been driven.

NOTE: Pressing READ /Scroll Down key will read

Diagnostic Trouble Codes and Data and Holding

ERASE key will erase results again.

ERASE?

DONE

NO LINK