Specifications

muffler that you can see through rather than the chambered style? If you want to spend the money, like the
sound, and own a race car (Bracket, Drag, etc.)...by all means, go for it. Just remember, just because you
can see through it doesn't mean its any better than a chambered.
Ignition Systems (MSD)
Most people choose the MSD Ignition Systems as their "High Performance" ignition system. There's
nothing wrong with them and the only reason we don't provide the MSD systems on this site is that MSD
doesn't seem to want to work with the smaller shops on pricing. If you do decide to run with the MSD
system, make sure that you get the following parts with your order:
• MSD Tach Adapter Harness - P/N# 8910. It prevents Code-43 from tripping in the PCM.
"Diagnostic Trouble Code P0351 Ignition Coil A Primary/Secondary Circuit Malfunction, Peak
Primary circuit current not achieved with maximum dwell time."
• MSD Universal Harness - P/N# 8873. It minimizes the excessive cutting of the factory wiring
harness.
Ignition Systems (Accel)
The Accel 300+ System is a complete "Plug and Play" system but does require a few pieces if you only
choose to run with the Accel Coil that's designed as a factory replacement fit (#140021). You'll need to
pick up the adapter harness for the '98 and newer Dakota/Durango/Ram Trucks. The part number is:
140021AH. This coil and adapter is included in the Accel 300+ Digital Ignition System Kit for the Dodge
trucks.
"Budget Modifications" for your V6/V8
• Build yourself a "Home -Brew" 3" Intake system from Black Plastic tubing found at Home Depot
and grab a Fernco rubber coupling (to attach to your airhat) - $10 approximately
• Add a 6x9" K&N Cone Filter - $35 approximately
• Remove the rubber flap on the passenger-side/radiator support (adds cold air to the intake) - FREE
• 180 Degree Robert Shaw High-Flow Thermostat - $9 approximately
• Relocate IAT Sensor into the intake tube - FREE (or use the IAT Adjuster from SpeedTweaks -
$35)
• Readjust TPS Sensor to .7v (see below)
• DynoMax Super-Turbo or MagnaFlow (#12256) - Single 2.5" IN/OUT (Replaces factory muffler)
- $100 Installed approximately (Parts + Labor)
Total cost of the modifications listed is around $150-$200. You can also add a V6 to V8 Throttle Body
conversion kit to your V6 for an extra $210 + Shipping...we carry the kits in stock.