Specifications

.
3.
Remove the thrust plate and chain oil tab (Figure 1). Discard the parts.
4. Install the timing chain tensioner p/n 53021195AA in the position where the thrust plate and oil tab was
installed (Figure 2). Torque the bolts to 24 Nm (210 in. lbs.).
5. Install the new timing sprockets and chain p/n 083507095. Align the timing marks per the appropriate
service manual procedure. Torque the camshaft bolt to 68 Nm (50 ft. lbs.).
6. Remove the lock pin that holds the tensioner plate for the chain. Discard the pin.
NOTE: WITH THE TIMING CHAIN TENSIONER INSTALLED, THE CAMSHAFT END PLAY WILL
BE 0.051 - 0.330 MM (.002 TO .013 IN).
7. Reinstall the remaining components per the appropriate service manual procedures.
POLICY: Reimbursable within the provisions of the warranty.