User Guide

573102 | REV. B | 03.2016
Bosch Automotive Service Solutions Inc.
CP9680
AutoScanner® Plus
|
User guide | 31
|
en
ABS LOAD(%)
ABSLT TPS($01)
ABSLT TPS($07)
ACC POS D(%)
BARO PRS(”HG)
CALC LOAD(%)
CALC LOAD(%)
CAT TEMP11(°F)
CLR DIST(mi)
CLR DIST(mi)
0.0
6.3
6.3
0.0
29.2
0.0
0.0
73
499
513
Absolute Load Value
If Long PID Names is turned ON, the expanded text for
the PID will scroll on the bottom line of display. See
“Long PID Names” in section 3.
If the icon displays while a PID is selected press
to select PIDs to graph. A maximum of 2 PIDs can
be graphed.
Select PIDs to Graph
✓ABSLT TPS(%)
CALC LOAD(%)
COOLANT(°F)
ENG SPEED(RPM)
EQ RATIO11
IAT(°F)
IGN ADV(°)
LT FTRM1(%)
Throttle Position
• Use the RIGHT arrow key to select/deselect
PIDs. The highlighted PID from when was
pressed is already selected
• Use the LEFT arrow key to deselect all PIDs.
• Press to view graph of selected PIDs.
• When graphing two PIDs, use the UP and
DOWN keys to highlight the desired PID, which
will also display the appropriate scale.
• Press the key to pause the graph. Press
the key again to continue graphing.
• If the icon displays while a PID is selected
press to view graph.
3. Return to PID screen.
• Press .
4. Return to Select Data to View menu.
• Press .
5. Return to Datastream Menu.
• Press .
Custom List Select
The Custom Data List allows certain PIDs from the View
Entire Data List, such as those PIDs that apply to a
specific driveability symptom or system, to be selected.
From Select Data to View menu:
1. Select Custom List Select.
• Use the UP and DOWN keys until Custom
Data List is highlighted.
• Press .
Select Data to View
Entire Data List
Custom Data List
English/Metric
2. Select View Instructions or Not.
• Use the LEFT and RIGHT keys.
• Press .
Custom Setup
Do you want to view
instructions for creating a
custom data list?
No
Yes
3. Select PIDs to View.
• Use the UP and DOWN keys to move up
and down list.
• The RIGHT arrow selects or deselects data
parameter. All selected data values are marked
with a √ symbol.
• The LEFT arrow deselects all marked data
parameters.
• The key starts recording data or display-
ing selected data parameters.
• If Long PID Names is turn ON, the expanded text
for the PID will scroll on the bottom line of
display. See “Long PID Names” in section 3.
• Selected PIDs are kept until you exit View Data
and return to the Datastream Menu.
Select Custom List
MIL STATUS
O2S11(V)
O2S12(V)
O2S21(V)
O2S22(V)
OBD2 STAT
PTO STATUS
ST FTRM11(%)
Malfunction Indicator Lamp Statu
4. View PIDs on Scan Tool.
• Use the UP and DOWN arrow key.
• See Appendix A for PID Definitions.