ASSEMBLY, MAINTENANCE, & USER MANUAL MODEL # APGD9B WARNING Read the assembly, installation, care, maintenance, and use instructions in this manual prior to assembling and using this equipment. Save this manual for future reference. Ages: 4-8 Maximum occupancy: 5 users Maximum weight: 81 lbs each, Total weight limit 405 lbs. Skywalker Holdings LLC P.O.
TABLE OF CONTENTS Part List.....................................................................................................................................................................................3 Part Identification........................................................................................................................................................4-5 Exploded Drawing...............................................................................................................
PART LIST Key No. Qty. Description 1 2 3 4 5 6 7 8 9 10 11 12 13 # 10 40 10 25 5 5 10 20 6 72 36 1 1 1 Tube 1 (895mm) Tube 2 (671mm) Tube 3 (818mm) Tube 4 (638mm) Tube 5 (511mm) Tube 6 (732mm) M10X30mm Bolt M10X35mm Bolt M10X33mm Bolt M10 Washer M10 Nut 6mm Hex Key Wrench User’s Manual ORDERING REPLACEMENT PARTS We get it, sometimes things happen, but the fun shouldn’t stop just because you need a new bolt or screw. To order replacement parts, check out our website at: www.skywalkertrampolines.
PART IDENTIFICATION Before you begin, take a look at the drawings below to make sure you have all the parts. The numbers in the squares to the left (key numbers) will help you identify the parts during assembly.
7 M10x30mm Bolt (x10) 10 M10 Washer (x72) 13 Wrench (x1) 8 M10x35mm Bolt (x20) 11 M10 Nut (x36) 5 9 12 M10x33mm Bolt (x6) 6mm Hex Key (x1)
PARTS LOCATION DRAWING (4) (6) (11) (10) (4) (4) (6) (6) (4) (10) (2) (4) (6) (2) (5) (10) (9) (11) (6) (8) (10) (2) (11) (2) (2) (5) (10) (4) (8) (10) (11) (2) (2) (2) (3) (2) (4) (4) (3) (2) (2) (1) (7) (10) (11) 6 (10) (4) (9) (10) (4) (10) (4) (8) (10) (11) (10)
ASSEMBLY READ THIS BEFORE YOU BEGIN • We’ve provided some tools to help with assembly, but you’re more than welcome to use your own • The assembly steps refer to parts by their descriptions and key numbers (see the part list on page 3) • The assembly steps are written in a specific order, and if you don’t follow them exactly, you may end up having to start all over again • Most importantly, this may not be the easiest thing you’ve ever done, but it will be worth it.
ASSEMBLY STEP 3 2 10 Tube 2 (x20) Size: 671mm Remove a nut and place two tube 2’s (2) onto the bolt and in front of the bars from the bottom ring. Place a M10 washer [10] and lightly replace the M10 nut [11]. The just placed tubes should meet in the middle to form a triangle like the below image. Continue attaching until all 20 tubes are connected to the bottom ring of the geo dome. Each bolt needs to connect four tubes [two on bottom ring and two that angle upwards.) Note: Do not tighten the nuts.
STEP 5 2 Remove a nut from one of the M10X35mm bolts (8) from step 4, and place a tube 2 [2] onto the bolt. Lightly replace the nut. Add another tube 2 directly to the left in the same way. Make sure the two tubes lean in towards each other to form a triangle. Continue placing bars in this manner until you have attached all the tubes to the second ring of the geo dome and your geo dome looks like the image below. Note: There will be a “skipped“ bar between each triangle.
ASSEMBLY STEP 7 4 Tube 4 (x10) Size: 638mm M10x33mm Bolt (x5) 9 10 M10 Washer (x5) 11 M10 Nut (x5) (9) (9) Using a tube 4 (4), attach one side of the tube to a tube 4 triangle section only [shorter tubes]. Use a M10X33mm bolt (9), M10 washer (10) and a M10 nut [11] [thread lightly as it will be removed in later steps] to attach. Continue attaching the remaining tube 4 bars at the intersections of the tube 4 only. This will result in attaching at every other intersection.
8 STEP 9 5 Tube 5 (x5) Size: 511mm (2) (11) (11) (10) 2 Tube 2 (x5) Size: 671mm (5) (2) (5) 10 M10 Washer (x5) (5) (2) Remove a nut from a M10X33mm bolt of the third ring and place a tube 5 onto the bolt. Add a M10 washer and lightly replace the nut. Now, remove the nut from the M10X35mm bolt directly to the right of where you just attached the tube 5 and place a tube 2 onto the bolt. Lightly replace the nut [do not add a washer].
ASSEMBLY STEP 10 11 6 Tube 6 (x5) Size: 732mm M10x35mm Bolt (x5) 8 10 M10 Washer (x5) (6) (10) (6) 11 (8) M10 Nut (x5) Using tube 6’s (6), connect accross the tubes from the previous step. Connect the tubes with M10X35mm bolts [8], M10 washers [10] and M10 nuts [11] [lightly place the nut as it will be removed in later steps]. Continue attaching until all five tube 6’s are connected. This completes the fourth and final ring of the geo dome.
STEP 13 9 M10X33mm Bolt (x1) 10 M10 Washer (x2) 11 (10) (11) (9) M10 Nut (x1) Last step! Connect the top of the geo dome by placing a M10X33mm bolt [9] through all five tube 4’s from the previous step. Secure with two M10 washers [10] on either side and a M10 nut [11]. [You will need two people for this step, one person inside the geo dome to place bolt and washer and one person outside the geo dome to place the second washer and to secure the nut. Finally, tighten all the nuts of the geo dome.
INSTALLATION WARNING! To reduce the risk of serious injury, read all important precautions and instructions in this manual and all warnings on the Geo Dome before assembly and use of this product. 1. It is the responsibility of the owner and supervisors of this geo dome and its accessories to make sure all users obey the safety instructions printed in this material. 2. This product is intended for use by children ages 4-8. 3. Use the geo dome only as described in this manual. 4.
MAINTENANCE & CARE INFORMATION Congratulations and high five on successfully assembling your new Geo dome! Now, the best way to keep your new geo dome in tip top shape, is to follow this checklist periodically: At the beginning of each play season: • Tighten all hardware. • Check all protective coverings on bolts, pipes, edges, and corners. Replace if they are loose, cracked, or missing. • Lubricate all metallic moving parts. • Check metal parts for rust.
GEO DOME SAFETY INFORMATION A Geo Dome is a recreational product. The information on this manual identify important safety precautions. The precautions are not all-inclusive, because a geo dome can be used in ways that this manual cannot cover completely. USING THE GEO DOME SAFELY Adult Supervision of Children Children using the geo dome must be supervised by adults at all times.
INSTRUCTIONS FOR USE WARNING To reduce the risk of serious injury, read and follow all of the warnings, precautions, and instructions in this manual before you use this equipment. Warnings and instructions for care, maintenance, and use of this geo dome are included to promote safe enjoyable use of this equipment. 1. The Geo Dome is designed for up to 5 persons and has a 405 lb. total weight limit. 2. On-site adult supervision for children of all ages at all times is required. 3.
WARNING LABEL PLACEMENT The labels shown on this page have been attached to the geo dome in the indicated locations. Size of the whole product: 9’Lx9’Wx4’H L2780xW2780xH1320mm WARNING Model APGD9B 9 ft Geo Dome • On-site adult supervision at all times. • THIS PRODUCT IS INTENDED FOR USE BY CHILDREN FROM AGES 4 TO 8, maximum weight of 81 lbs each. Made in China Skywalker Holdings, LLC Maximum Occupancy: 5 children PO Box 574, Brigham City, UT, 84302 USA APGD9B 5 children www.skywalkertrampolines.
PLAYGROUND SURFACING MATERIALS The following information is from Section 4 of the United States Consumer Product Safety Commission’s (USCPSC) Outdoor Home Playground Safety Handbook for playground surfacing material. X3. SECTION 4 OF THE CONSUMER PRODUCT SAFETY COMMISSION’S OUTDOOR HOME PLAYGROUND SAFETY HANDBOOK X3.
LIMITED WARRANTY Skywalker Holdings, LLC warrants its products to be free from defects in material and workmanship under normal use and service conditions. The steel frame is warranted for three (3) years after the date of purchase. All other parts are warranted for one (1) year after the date of purchase. Warranty coverage extends only to the original retail purchaser from the date of original purchase. This warranty is only valid concerning products used for residential use.
NOTE: SKYWALKER HOLDINGS, LLC IS NOT RESPONSIBLE OR LIABLE FOR INDIRECT, SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THE PRODUCT OR OTHER DAMAGES WITH RESPECT TO ANY ECONOMIC LOSS, LOSS OF PROPERTY, LOSS OF REVENUE OR PROFITS, LOSS OF ENJOYMENT OR USE, COST OF REMOVAL, INSTALLATION OR OTHER CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES.
