Owner's manual

182
21.5.1. Disconnecting from a PC.
• Make sure that PLEXTALK and the PC are connected via the USB
connection and that both are turned ON.
• Left click the "USB" or "Remove Hardware" icon located in the Task
Tray at the lower right of the PC screen.
• In Windows 98 SE, left click "Stop USB-ATA/ATAPI Mass Storage
Controller".
In Windows Me, left click "Stop USB CD-ROM" or "Stop USB Disk".
(CD-Drive)
(Card Drive)
In Windows 2000, left click "Stop USB Mass Storage Device"
In Windows XP, left click "Safely remove USB Mass Storage Device".
• In Windows 98 SE, The message box ("Device can safely remove
from the system. ") will appear, then click "OK".