Owner's manual

159
NOTE: You are not able to cut parts of phrases. If you wish to cut a part of
a phrase, you must first split the phrase into smaller parts and then cut the
required parts of the original phrase.
NOTE: If the cut phrase contains a page or heading, cutting it deletes that
page or heading and renumbers subsequent pages and headings
automatically.
19.5.2. Copying phrases.
You can copy a single phrase or multiple sequential phrases of audio from
your recording by performing the cut phrase operation. Phrases that are
copied will be placed on the audio clipboard.
To copy a phrase, do the following:
• Press the Menu key once to access the Main Menu.
• Use the Number 4 or 6 key to go to the "Edit" option and select it
by pressing the Enter key.
• Use the Number 4 or 6 key to go to the "Copy phrase" option and
select it by pressing the Enter key.
• PLEXTALK will ask you to select the beginning phrase to copy.
• Use the Number 4 or 6 key to move through the recording by
phrases until the first phrase you want copied is spoken. Select this
as the first phrase to copy by pressing the Enter key.
• PLEXTALK will ask you to select the end phrase to copy.
• Use the Number 4 or 6 key to move through the recording by
phrases until the last phrase you want copied is spoken. Select this
as the last phrase to copy by pressing the Enter key.
• PLEXTALK will then ask you to confirm that you wish to proceed.
Press the Enter key to confirm or the Cancel key to abort.
• If you press the Enter key, PLEXTALK will copy the selected phrases
to the audio clipboard and confirm it by saying "Finished".
NOTE: Only the audio of the selected phrases is copied. The heading,
page and group markers are not copied.
NOTE: You are not able to copy parts of phrases. If you wish to copy a
part of a phrase, you must first split the phrase into smaller parts and then
copy the required parts of the original phrase.