Owner's manual

• PLEXTALK will then ask you to confirm that you wish to continue.

Press the Enter key to start CD finalisation or the Cancel key to

abort the process.

• You can check the progress of the finalisation process by pressing

any key on PLEXTALK, at any time.

• After a while CD finalisation will be complete and PLEXTALK will

say "Finished".

CAUTION: If the battery runs down during CD finalisation, you may end

up with a CD that is not playable. It is strongly recommended that you

connect to a mains power source before performing CD finalisation.

NOTE: When you have finalised a Music CD, you will not be able to add

further recording at a later stage.

NOTE: If your commercially available CD player does not support CD-RW,

your recordings on CD-RW media may not be playable on that player.