Owner's manual

122
17.2.2. Recording mode settings.
Each recording mode has predetermined settings for the following 5
parameters:
• Auto section setting - PLEXTALK can be set to automatically create
a new section, in a DAISY recording, after a specified amount of
time with no audio input, for example 2 seconds. Use the setting
"No setting" to create a continuous recording with no new sections.
• Time to auto stop recording when no sound - This is the time that
PLEXTALK will continue to record with no audio input. After this
time, recording stops automatically.
• Timing of start recording - Recording can be set to start either
when you press the Record Key or when input audio is detected.
• Background noise level of input sound - If you are recording in a
low noise environment, such as a studio, use the "low" setting. If
your recording environment is noisy, such as a conference or
lecture, use the "High" setting.
• Record speed setting - This setting can be used to choose between
normal speed recording and double speed recording. This can be
useful for dubbing from a double speed cassette.
The preset parameters for the 5 recording modes are as follows:
• Standard mode
Auto section setting: No setting
Time to auto stop recording when no sound: No setting
Timing of start recording: When push Record key
Background noise level of input sound: Normal (-28dB)
Record speed setting: Normal speed
• Music mode
Auto section setting: 2 seconds
Time to auto stop recording when no sound: 1 minute
Timing of start recording: When push Record key