Manual

11
REFER TO THE DIAGRAM (above) FOR PARTS IDENTIFICATION.
READ
THESE INSTRUCTIONS IN THEIR ENTIRETY BEFORE
UNCRA
TING SPLASH!.
Prior to opening the pallet, inspect the external condition for any visible
damage. Note specific damage identified on Bill of Lading. Contact RMT
Aquatics or dealer your immediately to notify of missing or damaged parts.
The SPLASH! is shipped on a cardboard covered pallet. You will need to
gather the following tools to begin the unpacking and assembly of your unit:
• a Phillips head screwdriver or powered drill to remove the cardboard
• a 3/4” socket wrench,
• a small flat blade screwdriver,
• a knife or cutters to cut the shrink-wrap and bands.
Splash! – Semi-Permanent Aquatic Lifting Systems
UNPACKING & ASSEMBLY INSTRUCTIONS