Manual
8 9
Warranty Replacement Procedure
Below is the procedure for replacing your Medlight 630PRO unit due to
defect in workmanship or materials within the one (1) year warranty period:
1. The Medlight 630PRO device must be returned with copy of original
purchase receipt and in original product packaging.
2. Call Medical Devices Customer Service at (727) 451-7160. The
Customer service representative will provide you with a Return Merchandise
Authorization (RMA) number and a return address.
3. The return shipment must be prepaid and the RMA number
must be
displayed on the outside of the shipping container or the shipment will not
be accepted by Medical Devices, Inc..
Returns not in the original packaging will not be honored under the terms of
this warranty.
Customer Service and Technical Support
For all Customer Service and Technical Support issues including warranty
returns and replacement parts please contact our Customer Support
Department at:
Medical Devices, Inc.
Customer Service Department
4600 140th Ave. North
Suite 200
Clearwater, Florida 33762
The MedLight
TM
630 Pro was manufactured in the USA under
license from Life Without Pain, LLC. All rights to the
MedLight
TM
630 Pro were acquired by Medical Devices, Inc.
Medical Devices, Inc. will provide all product support and
Warranty management for units sold by Medical Devices Inc.
or any of its authorized distributors or resellers.
PATENT PENDING MADE IN USA FDA CLEARED
Pg 9
Limited Warranty
Medical Devices, Inc. (MDI) warrants the Medlight
630PRO device to be free from defects in workmanship
and materials under normal use for a period of one (1)
year from the date of purchase. MDI’s sole obligation
under this warranty will be to repair or replace (new or
refurbished), at its option, the Medlight 630PRO Unit that
proves to be defective during the warranty period. The
foregoing shall be the sole remedy under the warranty.
Except as set forth herein, MDI makes no warranties,
either expressed or implied, including the implied
warranties of merchantability and fitness for a particular
purpose. No warranty is provided if any Medlight
630PRO Unit is modified without the express written
consent of MDI.
This warranty is not assignable and is applicable only to the
original purchaser.
The instructions contained in this manual in no way represent a guarantee
for successful treatment. SEEK MEDICAL ATTENTION IF PAIN PERSISTS.
DO NOT discontinue your regular medication without consulting your doctor.
The Medlight 630PRO Pain Therapy Device will not eliminate disease that
causes pain.
Replacement Parts
Please use the part numbers below when ordering replacement parts. Be
sure to use onl y Medlight 630PRO parts.
1075-0030 Power Supply
1075-0031 Power Supply Cord
1075-0033 Flexible Velcro Holding Strap
1075-0034 Car Adapter
1075-0038
Goggles
8
Warranty Replacement Procedure
Below is the procedure for replacing your Medlight 630PRO unit due to
defect in workmanship or materials within the one (1) year warranty period:
1. The Medlight 630PRO device must be returned with copy of original
purchase receipt and in original product packaging.
2. Call Medical Devices Customer Service at (727) 451-7160. The
Customer service representative will provide you with a Return Merchandise
Authorization (RMA) number and a return address.
3. The return shipment must be prepaid and the RMA number must be
displa
yed on the outside of the shipping container or the shipment will not
be accepted by Medical Devices, Inc..
Returns not in the original packaging will not be honored under the terms of
this warranty.
Customer Service and Technical Support
For all Customer Service and Technical Support issues including warranty
returns and replacement parts please contact our Customer Support
Department at:
Medical Devices, Inc.
Customer Service Department
4600 140th Ave. North
Suite 200
Clearwater, Florida 33762
Tel: (727) 451-7160
Fax: (727) 451-7199
E-Mail: info@mdevicesinc.com
Web: www. .com
The MedLight
TM
630 Pro was manufactured in the USA under
license from Life Without Pain, LLC. All rights to the
MedLight
TM
630 Pro were acquired by Medical Devices, Inc.
Medical Devices, Inc. will provide all product support and
Warranty management for units sold by Medical Devices Inc.
or any of its authorized distributors or resellers.
PATENT PENDING MADE IN USA FDA CLEARED
Pg 9