Instruction Manual

SECTION 3—SAFETY INSPECTION/TROUBLESHOOTING
Part No. 1110558 23 Tracer
®
IV
❑ Adjust rear wheel bearing system if wheel wobbles noticeably or binds to a stop.
❑ Ensure rear wheel bearings are clean and free of moisture.
❑ Adjust front casters/forks bearing system if wheel wobbles noticeably or binds to a
stop.
❑ Ensure wheel bearings are clean and free of moisture.
Inspect/Adjust Periodically
❑ Ensure that the wheelchair rolls straight (no excessive drag or pull to one side).
❑ Inspect frame and crossbraces for loose or missing hardware.
❑ Inspect for bent frame or crossbraces.
❑ Inspect for rough/sharp edges on frame and crossbraces.
❑ Ensure that the casters are free of debris.
❑ Check that wheel locks are easy to engage.
❑ Inspect seat and backs for rips and sagging.
❑ Check that there is no excessive side movement or binding in the rear wheels when
lifted and spun.
❑ Inspect handrims for signs of rough edges or peeling.
❑ Inspect handrims for loose or missing hardware.
❑ Ensure wheel bearings are clean and free of moisture.
❑ Clean upholstery and armrests.
❑ Check that all labels are present and legible. Replace if necessary.
Troubleshooting
Chair
Veers
Right/
Left
Chair 3
Wheels
Sluggish
Turn or
Performance
Casters
Flutter
Squeaks
and
Rattles
Looseness
in
Chair
Solutions
XX X X
Check tires for correct
and equal pressure
XXXX
Check for loose nuts and
bolts.
XX X
Check caster headtube
angle.
XX
Check that rear wheels
are equally spaced away
from seat frame.