Instruction Manual

e wheelse wheels

Rear Rack Installation

Tools you will need to attach the rear rack

- Phillips Screwdriver

1. Remove rear pad with phillips screwdriver

2. Attach rack with four screws using a phillips screwdriver

3. Re-install rear pad. Be sure to use the integrated clip when re-installing (Figure M).

(M)

Storage Box Installation

Tools you will need to attach the storage box

- Phillips Screwdriver

- Pliers

1. Center open storage box on rear rack with storage lever facing toward the back.

2. Place one mounting plate and two screws through the inside holes (Figure N).

3. Use the remaining mounting plate underneath the storage box and nger tighten the nuts on (Figure O).

4. Tighten using phillips screwdriver and pliers.

(N)

(O)