User's Manual

GFCI (120 volt units only)

e GFCI, or Ground Fault Circuit Interrupt, ﬁtting on the power

pack electrical cord should be tested monthly. ere are no user

serviceable parts inside the GFCI. Do not open the GFCI as this will

void your warranty.

To test the GFCI, use the following procedure.

If the GFCI device does not function properly, do not

use your spa. Call the dealer or factory immediately for

instructions. Do not bypass the GFCI device.

1. T

urn on the turbo wave blower.

2. Push the test button on the GFCI

located at the end of the power

cord. e GFCI light should go

out and the turbo wave blower

should shut oﬀ. If the GFCI light

does not go out, and the turbo

wave blower does not shut oﬀ, the

GFCI is faulty. Do not use the spa.

Immediately contact your dealer

or the factory for instructions.

3. Press the reset button on the

GFCI. e light on the GFCI

should turn on. If the GFCI light does not turn on the GFCI is

faulty. Do not use the spa. Immediately contact your dealer or the

factory for instructions.

ere are no user serviceable parts in the GFCI. DO NOT open the

GFCI as this will void the warranty.

Light

Test

Reset