OWNERS MANUAL VOL1 - ISSUE1 1
TABLE OF CONTENTS aXs Aquatic Lift System Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Component Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Unpacking & Assembly Instructions . . . . . . . . . . . . . . . . . . . . . . . 9 Operating the aXs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INTRODUCTION The purpose of this document is to provide information relating to the operation, care and maintenance of the aXs Aquatic Lift System. Our goal is to provide our customers with the most advanced and innovative designs that offer exceptional quality at affordable prices. We design and manufacture our products so that all individuals with disabilities and mobility impairments can have access and enjoy the recreational activity of their choice.
STANDARD aXs 4
THE aXs – SEMI-PORTABLE AQUATIC LIFT SYSTEMS PRODUCT OVERVIEW The aXs is specifically designed for both residential applications as well as hospitality and multi-unit facilities who are seeking a sensible solution for providing access to their swimming pools for users with disabilities. The aXs is easy to operate and maintain, is transportable, is reliable, and is priced to fit into any budget.
PRODUCT COMPONENTS STANDARD aXs Component Description The following are the key components used in the aXs: Base Assembly: The base assembly (not shown) connects the aXs to the pool deck and includes the turning elements of the lift. The insert portion of the base assembly is inserted into the deck anchor. The mast is attached to the base assembly using two nylon locking nuts.
Component Description- continued Support Arm: Provides stability for the seat arm. Fabricated from an aluminum extrusion, the seat arm nests inside the actuator arm to provide a unified look and avoid pinch points. The support arm is treated with a durable powder coated finish Seat Arm: Provides an attachment point for the seat assembly. Fabricated from an aluminum extrusion and treated with a durable powder coated finish. Housing: Two piece housing covers the turning components and gears.
Hand Control: The four button unit controls all lift movements for the Basic Model. The two button unit controls the up and down movements of the aXs MT (manual turning version). The arrows indicate the direction of movement. All Hand Controls are fully waterproof and meet IP67 standards. Seating System: The seating system used with all RMT aquatic lifts is the product of years of feedback from our customers and information gathered from focus groups comprised of users of our lifts.
UNPACKING & ASSEMBLY INSTRUCTIONS REFER TO THE DIAGRAM (page 5) FOR PARTS IDENTIFICATION. READ THESE INSTRUCTIONS IN THEIR ENTIRETY BEFORE BEGINNING INSTALLATION Prior to opening the shipping pallet, carefully inspect the external condition of the shipping materials for any visible damage. It is important that any damage be noted on the Bill of Lading prior to signing for the delivery. Contact either RehaMed or your dealer immediately to notify us of any damage or missing parts.
OPERATING THE aXs Follow these steps to operate the aXs: • • • • • • • • • • Rotate the seat to either side of the lift that is the most comfortable position for transfer. The lift rotates 360º, so position the lift well over the pool deck away from the edge of the pool. Adjust the height of the chair for a comfortable transfer. Transfer onto the seat and fasten the seat belt. Raise the seat so there is ample legroom for travel. Rotate the lift over the water and lower the seat into the water.
DECK ANCHOR INSTALLATION The optimal mounting distance for the deck anchor is between 12 and 18 inches from the edge of the pool. The aXs is designed to be used with simple pool edge designs without protruding gutters. Please call RehaMed International with any questions concerning deck anchor placement or if the aXs will work in your installation. Concrete Pool Decks The deck anchor should be totally encapsulated in concrete. Make sure that there are no air pockets or empty space around the anchor.
BATTERY CHARGING The rechargeable battery should be connected to the charger when the lift is not in use. A fully charged battery will last approximately 30 lifting cycles, depending on the weight of the user. The battery has no memory, so it is not necessary to discharge the battery prior to charging. In fact, allowing the battery to fully discharge could cause damage and shorten the life of the battery.
ACCESSORIES The following accessories are included with each aXs lift: • Seat Belt Assembly • Console Cover • Foot Rest The following optional accessories may be purchased for use with your aXs lift: • Arm Rest Kit: Powder coated, stainless steel arm rests provide security and a stable surface for transferring. • Total Cover: Made of weather resistant polyester • Stability Vest: Five point restraint for individuals who need a higher degree of stability.
MAINTENANCE Minimal maintenance will prolong the life of your aXs lift. All electronic components should be kept clean and dry. The control box and battery should be protected from exposure to water. A waterproof console cover is provided with each aXs to cover these components and protect them from sudden rain showers or dousing with pool water. If the lift is used outdoors, a full cover is available and should be used.
TROUBLE SHOOTING Be sure the battery is fully charged before troubleshooting. Unit does not rotate Does unit raise or lower? Yes. 1. Check connection to Control Box. Be sure plug is pushed in all the way. 2. Check hand control connection to Control Unit for damaged pins. 3. Check connections on terminal block located on frame for loose wires. 4. Check connection cable for damage. 5. Reverse the motor cables as follows: Locate the area on the control box where the cables are attached.
WARRANTY INFORMATION All RMT Aquatic Lifting Systems have a Lifetime Warranty on the frame, excluding the powder coated paint finish, which may become scratched with normal use. All electronic and motor components, with the exception of batteries, have a full two-year warranty. Within the warranty period, we will repair or replace any part found to be defective upon our examination, but will not pay shipping costs or other expenses. To obtain warranty service, call or write to us at the address provided.
Batteries Batteries have a normal lifespan of between 2-3 years, depending on their use and care. Batteries should be left on the charger when not in use and should never allowed to fully discharge. Allowing the battery to fully discharge can damage the battery. The battery has contacts located on the bottom of the battery housing. The battery should never be placed on a conductive surface that would cause a short. If this occurs, it is likely that the fuse located inside the housing would break.
SPECIFICATIONS aXs Aquatic Lift System. 1. Dimensions/Capacity Mast Height Height-Arm Raised Overall Length-extended Storage Length-w/o chair Unit Weight-inc. chair Unit Weight-w/o chair Power Battery Life Lifting Capacity 32” (81 cm) 56.5” (143.5 cm) 68.75” (174.6 cm) 47” (119 cm) 81 lbs (36.7 KG) 68 lbs (30.8 KG) 24v DC 30 cycles (approx.) 300 lbs (136 KG) 2. Actuator Type Maximum Thrust Voltage Maximum Amp Draw Maximum Speed Linak LA34 Mechanical Actuator 1680 Lbs 24v DC 9 0.59 in/sec 3.
5.
PARTS LIST Part Number AX1000 Description LA34 Actuator 100-1000 Control Box-Standard AX1150 Control Box-Wireless 100-2000 Battery 100-3500 Battery Charger AX1400 Hand Control-4 Channel AX1420 Hand Control-2 Channel AX1450 Hand Control_Wireless AX1430 Hand Control Hanger 120-1100 24v Motor 120-1800 Motor Cord w/ O ring 100-3100 Battery Bracket AX2000 Mast AX2110 Top Extrusion AX2200 Bottom Extrusion AX2300 Seat Arm AX2400 Seat Frame AX2450 Seat Back/Bottom AX3000 Large G
