User's Manual

controller in centrally. Click FIT AP, then switch to FAT AP.
For the FAT AP, the login page showed as follow:
P7: Device Status
FAT AP: Mean this AP in FAT mode now, click here to change to FIT AP if need. Pls note: FAT AP comply with SNMP
protocol, can be configured through GUI interface or managed by SNMP controller. FIT AP comply with CAPWAP
protocol, can be managed by CAPWAP controller.
Operation mode: the default operation mode is AP; But in FAT AP, it support gateway, repeater, WISP operation mode
also.
In the above picture, showed in AP operation mode, CPU usage, AP location, LAN IP and Wi-Fi status. And it can view
user Wi-Fi connection information after click user quantity: