User's Manual

Short GI: data isolation, default is on.
Coverage Threshold: The input data is signal strength that user connect with AP. The data is smaller, then mean user
will connect with weak signal AP; the data is larger, mean user will connect to the stronger signal AP. Recommend to
input -90dBm.
TX Power: mean RF power is adjustable; Max mean the RF power showed in data sheet; Efficient: 4dBm lower than
max; Enhanced: 4dBm lower than efficient...
Preferred 5G: mean band steering, 5G priority. Enable it, then mobile phone will connect with 5G SSID in priority.
DFS: special channel, most suit for USA, default is disable.
4.Network setting:
In this page, mainly to show the LAN setting, VLAN setting and cloud server setting.
P30 Network Setting
LAN Setting: