User's Manual

RST: Reset Button, it make AP revert to default data after press it 15 seconds.
WAN: Gigabit WAN Port, connect with ADSL modem or Internet mainly. It will be LAN port under Wireless AP and WiFi
Repeater operation mode
LAN: Gigabit LAN Port to end users
LED: LED Indicator of WAN port and LAN port
DC: DC power connector
AP installation:
Power Supply and working diagram:
1. Work at home:
If work at home, this device can be power by DC adapter or PoE adapter. Then access into IP address
192.168.188.253, switch to FAT AP mode and setup the SSID. User can choose gateway or AP operation mode based
on their Internet environment and structure.