User Manual

General fire hazards
No unusual fire or explosion hazards noted.
6. Accidental release measures
Personal precautions,
protective equipment and
emergency procedures
Provide adequate ventilation and avoid contact with skin and eyes. Wear appropriate protective
equipment and clothing during clean-up. For personal protection, see section 8 of the SDS. Local
authorities should be advised if significant spillages cannot be contained. Remove all sources of
ignition.
Methods and materials for
containment and cleaning up
Sweep up and shovel into suitable containers for disposal. Contain the spill, then place in a
suitable container. Collect and dispose of spillage as indicated in section 13 of the SDS. For waste
disposal, see section 13 of the SDS. Prevent product from entering drains.
Environmental precautions
Avoid release to the environment. Prevent further leakage or spillage if safe to do so. Avoid
discharge into drains, water courses or onto the ground. If large quantities enter a waterway,
advise local authorities.
7. Handling and storage
Precautions for safe handling
Avoid contact with eyes, skin, and clothing. Provide adequate ventilation. When using, do not eat,
drink or smoke. Do not taste or swallow. Wear appropriate personal protective equipment. Avoid
release to the environment.
Conditions for safe storage,
including any incompatibilities
Keep containers tightly closed and dry. Store in a cool well ventilated area away from incompatible
materials. Keep away from direct sunlight. Keep away from heat, sparks and open flame. Keep out
of the reach of children. Metal containers must be lined.
8. Exposure controls/personal protection
Occupational exposure limits
US. ACGIH Threshold Limit Values
ValueComponents Type
TWA 10 ppmBENZYL ACETATE (CAS
140-11-4)
Biological limit values
No biological exposure limits noted for the ingredient(s).
Appropriate engineering
controls
General ventilation normally adequate.
Individual protection measures, such as personal protective equipment
Eye/face protection
Wear safety glasses or goggles if handling large quantities.
Skin protection
Hand protection
In case of prolonged or frequently repeated contact, wear appropriate gloves.
Other
None necessary under normal conditions of use. Wear appropriate gloves if handling large
quantities.
Respiratory protection
Under normal conditions of use respiratory protection is not expected to be required.
Thermal hazards
Not applicable.
General hygiene
considerations
When using, do not eat, drink or smoke. Always observe good personal hygiene measures, such
as washing after handling the material and before eating, drinking, and/or smoking. Routinely
wash work clothing and protective equipment to remove contaminants.
9. Physical and chemical properties
Appearance
Physical state
Solid.
Form
Solid gel
Color
Not available.
Odor
Characteristic.
Odor threshold
Not available.
pH
Not available.
Melting point/freezing point
140 - 185 °F (60 - 85 °C)
Initial boiling point and boiling
range
Not available.
Flash point
> 200.0 °F (> 93.3 °C)
Evaporation rate
Not available.
Flammability (solid, gas)
Not available.
3 / 8
Material name: Breezy Linen Refill Cartridge
48253 Version #: 01 Issue date: March-24-2015
SDS US