Instructions / Assembly

2.5"
2.5"
1"
4"
1"
1.25"
9"
9"
4"
10"
Wood nailer
Insulation
Membrane
Fastener
Roof deck
Exhaust or Intake
Curb Mount Flange
Roof Vent
Duct from
Below
Roof Curb
Active Ventilation Products, Inc.
Website: roofvents.com Email: [e-mail]
1/1/2023
Roof Curb Model: RC-7-H6
Inside Diameter: 9", Outside Length & Width: 10", Height: 6"
Roof Curb Installation Instructions
Roof Curb Flashing Detail
Angled View
Top View
Screws
- Aluminum Alloy 3003-H14
- Thickness = 0.025" ± 0.005
- Tolerance = ± .25 (
1
4
" )
1. Cut a round hole 9" in diameter in the roof deck.
2. Total number of screws needed for flange = 12
3. Recommended installation screw: #10 x 1 1/2" Sheet Metal Screw
4. Flash roof curb onto deck according to specifications of the
membrane manufacturer.
5. Screws not included.