Installation Guide

5777-5
Tail Pipe Installation with Roof Vent
Installation Instructions for RBV-4-C2-TP
Step 9:
Push Flex Duct back into attic, then lift shingles to
insert flange underneath.
Step 10:
With the vent in place secure the flange to the
shingle roof using a screw gun or drill
10A:
Required screw: #10 x 1.5” steel sheet metal screw
Total number of screws required = 8
Step 11:
This is how the Round Back Vent should look when
finished.
Page 3 of 3