Product Brochure

Active Ventilation Products Inc
800-Roof-Vent (766-3836) • 845-565-7770
roofvents.com • [e-mail]
Pitch Pan - Pitch Pocket
Model Number: PP-4x4-H5 | 4” x 4” Inner Diameter and 5” Tall
4"
4"
4"
4"
5"
4"
4"
2"
4"
2"
8"
8"
5"
.5"
Active Ventilation Products, Inc.
Website: roofvents.com Email: [e-mail]
Pitch Pan PP-4x4-H5
Inner Diameter = 4", Outer Diameter = 8", Height = 5"
7/29/2021
3"
.5"
4"4"
4"
4"
3"
4"
2"
2"
8"
4"4"
Active Ventilation Products, Inc.
Website: roofvents.com Email: [e-mail]
Pitch Pan PP-4x4-H3
Inner Diameter = 4", Outer Diameter = 8", Height = 3"
7/28/2021
Dimensions & Specications
• A roof ashing engineered to seal around small or irregular
roof penetrations
• Holds a reservoir of mastic material to provide a water-tight seal
• A retrot roof ashing kit
• Opens to easily wrap around roof penetrations
• Suitable for all climate zones
• Constructed of durable rust-free aluminum
4"
4"
4"
4"
5"
4"
4"
2"
4"
2"
8"
Active Ventilation Products, Inc.
Website: roofvents.com Email: [e-mail]
Pitch Pan PP-4x4-H5
Inner Diameter = 4", Outer Diameter = 8", Height = 5"
7/29/2021
Installation Instructions
1. Slide pitch pan around plumbing or electrical conduit.
2. To install pitch pan onto the roof deck, use one screw or roofing nail per
flange. The screws should be approximately in the center of the flange.
3. Total number of screws or nails needed for flanges = 4
4. To close the pitch pan, use #8 x 1/2" screw
5. Recommended installation screw: #10 x 1 1/2" Steel Sheet Metal Screw,
Pan Head, Phillips Drive. Type "A" Point, Zinc Plate Finish
6. Flash pitch pan onto roof according to specifications of the roof
manufacturer.
7. Screws not included.
Pitch Pan Flashing Detail
A/C
Unit
Wood nailer
Insulation
Roof Deck
Membrane
Pourable Sealer
Fastener
Fastener