Specifications

IF YOU ENCOUNTER ANY ADDITIONAL DIFFICULTIES NOT LISTED, VISIT OUR WEBSITE AT
WWW.ACTIVEPRODUCTS.COM OR CALL CUSTOMER SERVICE AT 1-866-924-7626 FOR
ASSISTANCE.
Garden hose
connection leaks.
Spray wand, or
extension, or
nozzle leaks.
Pump is nois
y.
Water leaks
from
pump (up to 10
drops per minute
is permissible).
Oil Drip.
Motor buzzes
but fails to run.
Loose fittings.
Missing/wo
rn rubber washer.
Spray nozzle not
properly attached.
Broken o-ring or plastic insert.
Pump is sucking air.
Loose fittings.
Water seals
are damaged or worn.
Oil seals
are damaged or worn.
Supply voltage below minimum.
System has
residual pressure.
Voltage loss due to extension co
rd.
Pressure washer not
used for long periods.
Tighten fittings.
Insert new washe
r.
Insert the spray nozzle into the trigger
gun. Ca
refully press in against the
spring tension and twist into the
locked position.
Call Customer Service.
Check that hoses and fittings
are air
tight.
Turn off machine and purge
pump by squeezing trigger gun until
a
steady flow of water eme
rges through
the nozzle.
Check that all fittings
are tight.
Call Customer Service.
Call Customer Service.
Verify that only the
pressure washer is
running on this ci
rcuit.
Turn unit “OFF”, squeeze trigger on
spray want to
release pressure, then
tu
rn unit “ON”.
Do not use extension cord with this
unit—plug di
rectly into power outlet.
Call Customer Service.
Symptom Cause Solution
TROUBLESHOOTING – continued
13