TM EVERYDAY PRESSURE WASHER ITEM: 39-8603-8 MODEL NO.: ZE03 CAUTION ! BEFORE OPERATING THIS UNIT, PLEASE READ THIS MANUAL THOROUGHLY AND RETAIN IT FOR FUTURE REFERENCE. IF YOU MUST STORE YOUR PRESSURE WASHER IN A PLACE WHERE TEMPERATURE IS BELOW 41ºF (5ºC), YOU MUST APPLY WINTERIZING PROCEDURE TO PROTECT IT. FAILURE TO WINTERIZE THE UNIT MAY PERMANENTLY DAMAGE PUMP AND VOID THE WARRANTY. SEE PAGE 10 FOR WINTERIZING PROCEDURE.
TABLE OF CONTENTS Technical specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Safety Features and Electrical Power Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Replacement Parts and Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
IMPORTANT SAFETY INSTRUCTIONS - READ FIRST! Safety Warnings When using this product, basic precautions should always be followed: • Read all the instructions before using the product. • Water spray must never be directed towards any electric wiring, devices or directly towards the pressure washer machine itself or fatal electric shock may occur. • To reduce the risk of injury, do not operate the machine near children. • Learn how to stop the machine and release pressure quickly.
SAFETY FEATURES AND ELECTRICAL POWER INFORMATION The pressure washer is equipped with a stop device that will sense when the trigger on the gun is released. It will open the power circuit to the motor and cause the pressure washer motor to stop. Motor will resume again when trigger is pulled. Extension Cords If possible, do not use extension cords with this product.
REPLACEMENT PARTS AND DIAGRAM 3 2 4 1 5 6 7 8 11 10 Parts List Item no. Quantity Part Name 1 1 Main Unit 2 1 Cable & Hose Hook ZE03-000-0001 3 1 Gun Holder ZE03-000-0002 4 1 Adjustable Wand ZE01-090-0003 5 1 Turbo Wand ZE01-090-0004 6 1 Gun Assembly ZE03-090-0001 7 1 Detergent Bottle & Wand ZE03-090-0005 8 1 High - Pressure Hose ZE03-090-0002 10 1 Water Filter ZE01-000-0003 11 1 Quick Coupling & Inlet Adapter ZE01-050-0000 Parts No.
ASSEMBLY AND OPERATING INSTRUCTIONS Assembly Time: 2 minutes / Tools Required: None Surface Preparation Before starting any cleaning task, it is important to inspect the area for objects which could create a hazard. Remove from the workarea which could be tripped over, such as toys or outdoor furniture. Ensure that all doors and windows are closed tight. Water Supply (Cold Water Only) Caution • Never use the pressure washer to draw in water contaminated with solvents (e.g.
ASSEMBLY AND OPERATING INSTRUCTIONS – continued Step 4 Attach the high-pressure hose to the water outlet. Twist tightly to avoid leakage. Fig. 5 Fig.6 Step 5 Step 6 Attach garden hose to water supply and turn water on. Plug the unit into an outlet.
ASSEMBLY AND OPERATING INSTRUCTIONS – continued Fig.7 Step 7 Before turning the unit ON, depress the trigger to bleed any trapped air out of the pump and hose. O / OFF O / OFF I/ON Step 8 Start the pressure washer by turning ON/OFF switch to ON.
USING THE ACCESSORIES Fig. 9 Adjusting The Spray The adjustable spray nozzle can be adjusted from fan to jet. The spray is adjusted from jet to fan spray by turning the nozzle as shown in Fig. 9. Caution Jet spray adjustment is very aggressive. Do not adjust while spraying. We recommend that for most cleaning applications a 20º spray angle should be used to avoid damage to the surface being sprayed.
WORKING WITH DETERGENTS Using the detergent Fig.10 Working with detergent ensures a quick soaking of the dirt, and allows the high-pressure water to penetrate and remove the dirt more effectively. Always spray detergent on a dry surface, do not pre-soak area. Wetting the surface first dilutes the detergent andreduces its cleaning ability Caution Make sure the gun safety lock is engaged so the trigger cannot be squeezed while the detergent nozzle is being attached. Fig.
SHUTTING DOWN AND CLEANING UP Step 1 Step 4 Turn the switch to “OFF” (0) position and unplug cord from outlet. Disconnect the garden hose from the water inlet on the unit. Step 2 Step 5 Turn off the water supply. Disconnect the the high-pressure hose from the high-pressure outlet and engage the gun safety lock. Step 3 Press trigger to release water pressure for 20~30 seconds. Warning Turn off water supply and squeeze trigger to depressurize the unit.
WINTERIZING AND LONG-TERM STORAGE Optimum Winterizing Procedure Alternative Procedure Material required: Pump saver If you cannot perform the Optimum Winterizing procedure, you can still protect your pressure washer from winter-damage: Winterizing your pressure washer will help protect and prolong its life. It is strongly recommend you follow the below steps using a pump saver. This will keep the internal parts lubricated, protected from rust, and prevents the pump from freezing. 1.
USER MAINTENANCE Connections Connections on pressure washer hoses, gun and spray wand should be cleaned regularly and lubricated with non-water soluable grease. Fig.13 Adjustable Nozzle Water Filter Screen When the nozzle is clogged, it will cause the pump to build pressure and may cause the unit to surge. You can clean the nozzle by carefully inserting a thin, sharp instrument (i.e. paperclip) into the tip to rid it of deposits.
TROUBLESHOOTING Symptom Cause Solution Motor will not start. On/Off switch is in the “OFF” (O) position. Turn switch to the “ON” ( | ) position. Unit does not reach high pressure. Output pressure varies high and low. No detergent. 12 Power cord is not plugged in. Plug in power cord. Extension cord is too long. Extension cord is not proper gauge. Extension cord is damaged. Replace extension cord with a 50’ 14 gauge cord. Electrical outlet does not supply adequate power. Try a different outlet.
TROUBLESHOOTING – continued Symptom Cause Solution Garden hose connection leaks. Loose fittings. Tighten fittings. Missing/worn rubber washer. Insert new washer. Spray wand, or extension, or nozzle leaks. Spray nozzle not properly attached. Insert the spray nozzle into the trigger gun. Carefully press in against the spring tension and twist into the locked position. Broken o-ring or plastic insert. Call Customer Service. Pump is noisy. Pump is sucking air.
WARRANTY LIMITED 1 YEAR WARRANTY This pressure washer is warranted to be free of defects in materials and workmanship under normal residential use for one (1) year. Specific warranty applies to: • Electric motor and pump are warranted for one (1) year. • Standard accessories and attachments including the gun, wand/hose and coupler are warranted for a ninety (90) day period. The warranty period is calculated from the date of purchase by the end user and covers the cost for replacement parts/equipment.
