Instructions / Assembly

5
AERATION KIT
INTAKE INSTRUCTIONS: The Venturi
intake provides air induction when
the airline is connected to the small
air intake port on the included hose
fitting. Attach the air muffler to the air
control valve using the tube connector.
Attach the air control assembly to the
Venturi air port on the included hose
fitting. Keep the air valve and muffler
assembly above the water surface level.
This pump can be used with or without
the Venturi air intake.
AERATION KIT
MUFFLER
CONNECTOR
AIR VALVE
MAINTENANCE
To clean the pump, remove the front cover and the impeller. Use a small brush and
stream of water to remove any debris.
IF THE PUMP FAILS TO OPERATE, CHECK THE FOLLOWING:
Checkthecircuitbreakerandtryanotheroutlettoensurethepumpisgeng
electrical power. NOTE: Always disconnect from electrical outlet before handling the
pump.
Checkthepumpdischargeandtubingforkinksandobstrucons.Algaebuildupcan
beushedoutwithagardenhose.
Check the inlet screen to ensure it is not clogged with debris.
Remove the pump inlet to access the impeller area. Turn the rotor to ensure it is not
broken or jammed.
Monthly maintenance will add to your pump’s life. NOTE: Ensure that the electrical
cord loops below the electrical outlet to form a “Drip Loop.” This will prevent water
from running down the cord into the electrical outlet.
AAPW40* 43 (163) 5 (19) 3 5/16" (8mm)
AAPW160* 172 (650) 15 (57) 9.5 1/2" (12.7mm)
AAPW250 291 (1,100) 25 (95) 16 1/2", 3/4" (15.9mm, 19mm)
AAPW400 370 (1,400) 40 (151) 24 1/2", 3/4" (15.9mm, 19mm)
AAPW550 529 (2,000) 55 (208) 33 1/2", 3/4", 1” (12.7mm,19mm, 25.mm)
AAPW800 793 (3,000) 80 (303) 58 1/2", 3/4", 1" (12.7mm,19mm, 25.mm)
AAPW1000 1110 (4,198) 100 (378) 80 1/2", 3/4", 1" (12.7mm,19mm, 25.mm)
* This model is not in-line compable.
Intake ngs are not represented in this chart. Each aeraon kit contains an extra ng..
Product
Item Code
Rated
GPH (LPH)
Recommended Size
gallons (litres,litros)
Was Fing Sizes Included
inches (milimeters)