Instruction manual

2222
NETW
O
RK
CO
NNE
C
TI
ON
1. Connect the DVR to a LAN port of the modem via a network
cable.
Consult your network administrator for more information.
- IP (static): To use this option you need to deselect the DHCP option, the IP address, Net
Mask and the gateway must be assigned manually. Remember, these parameters must be
within the modem range.
2. To assign the IP address to the DVR, enter to MENU > SETUP > NETWORK > LAN and
choose a modality to set the confi gurations.
The following instructions are only for reference. Look for how to open ports and
confi gure the modem with your Internet service provider (ISP).
Consult a technician in case of not knowing how to connect a DVR to the Internet.