User`s manual

The Wireless Connectivity Expert
ACT-IR224UN
User’s Manual
© Copyright 2005-2010 ACTiSYS Corp
Page 30 of 34
Jul 15, 2010
Version 1.2.0
14 OPERATION OF ACT-IR224UN
Establish IR Connection with another PC after confirming the detection of ACT-IR224UN as
indicated above. Place any other Raw IR device (e.g., ACT-IR220L+). Launch your
Communications application like “HyperTerminal” or any other application in the Windows.
15 LED BEHAVIOR
Status Behavior
Power on LED on for one second
Standby and receiving LED off.
Transmitting Blinks rapidly but weak
Configuring by ACT-IR224UN
utility
LED on for one second for read and write
operations.
16 ACT-IR224UN DIMENSIONS
Cable Length: 120 cm.
17 CHARACTERISTICS AND SPECIFICATION
Parameter MIN. TYPICAL MAX. Units
DC supply voltage 5.0 5.2
V
Supply voltage, VSS 0 V
Operating temperature range, TA 0 60
℃
DC current (Ready mode) 15 20 mA
DC current (Active mode) 60 100 mA
Infrared Transmitting range 1 158 200 cm
USB signal threshold level +4.8 +5V +5.5 V