User`s manual

The Wireless Connectivity Expert
ACT-IR224UN
User’s Manual
© Copyright 2005-2010 ACTiSYS Corp
Page 29 of 34
Jul 15, 2010
Version 1.2.0
13 APPLICATION GUIDELINE FOR CONFIGURATION UTILITY
1. Run this utility from C:\Program Files\ACTiSYS\ACT-IR224UN\
ACT-IR224UN-ConfigUtility-vx.x.x-yymmdd.exe
2. Select “Port ID” where ACT-IR224UN dongle is connected.
Note: 1. ACT-IR224UN Configuration Utility program will display the “Port ID” where
ACT-IR224UN’s are connected (i.e., “Possible Ports” as displayed at yellow
arrow in above screen).
2. To get the Port ID, please also refer to section 11.3 Device Manager Check
.
13.1 Refresh
This will refresh the ”Possible Ports” list and also check for ACT-IR224UN device from that list.
If device found, it will read the configuration detail and display in the screen,
13.2 Read Configuration
This will read the Current Configuration from ACT-IR224UN device.
13.3 Factory Default Setting
The factory default is ACT-IR220LN, 115.2 kbps.
13.4 Write Configuration
After change, please click “Write Configuration” to write the new settings to ACT-IR224UN device.