User manual

NMEA 0183 Buffer - NBF-3

Important Notices

The NBF-3 complies with the Electromagnetic Compatibility requirements according to EN60945. The unit

should always be used in conjunction with appropriate CE marked, shielded cable and connectors to ensure

compliance. A declaration of conformity is available for download at www.actisense.com.

Trademarks and Registered Trademarks

Actisense

and the Actisense logo are registered trademarks of Active Research Limited. All other trademarks are the

property of their respective owners.

The NMEA

name and NMEA logo are copyright held by the NMEA. All uses in this manual are by permission and no

claim on the right to the NMEA name or logo are made in this manual.

Fair Use Statement

The contents of this manual may not be transferred or copied without the express written permission of Active Research

Limited.

Technical Accuracy

To the best of our knowledge the information contained in this document was correct at the time it was produced. Active

Research Ltd cannot accept liability for any inaccuracies or omissions.

The products described in this manual and the specications thereof may be changed without prior notice. Active

Research Ltd cannot accept any liability for differences between the product and this document. To check for updated

information and specications please contact Active Research Limited.

Active Research Limited will not be liable for infringement of copyright, industrial property rights, or other rights of a third

party caused by the use of information or drawings described in this manual.

Product Registration

Please register your product via the online form www.actisense.com/support/prodreg.html.

Your product package includes a unit serial number. Your registration will assist Actisense Support to link your product

to your details, simplifying any future assistance you may require.

Product Guarantee

This product comes with a three year ‘return to base’ guarantee. If you suspect that the unit is faulty please refer to the

“Troubleshooting Guide” on page 14.

It is a requirement of the guarantee that all installations of electronic equipment follow the NMEA 0400 specication. Any

connection to a battery or power supply must meet the mandatory essential safety requirements that may be imposed

by local regulatory agencies.

Actisense products are intended for use in a marine environment, primarily for below deck use. If a product is to be used

in a more severe environment, such use may be considered misuse under the Active Research Limited guarantee.

Product Disposal

Please dispose of this product in accordance with the WEEE Directive. The product should be taken to a

registered establishment for the disposal of electronic equipment.