User manual

NMEA Data Multiplexer - NDC-4-A & NDC-4-A -USB

3. Make sure the ‘Include this location in the search’

option is ticked, and use the ‘Browse’ button to locate the

‘USB Drivers’ directory on the Actisense CD.

4. The ‘Actisense NDC USB Serial Converter’ driver is

not Microsoft Windows™ certied, but it has been ‘tried

and tested’ for stable and reliable operation with the

Actisense NDC-4. Click ‘Continue Anyway’ to carry on

with the installation.

5. The ‘USB Serial Converter’ driver is now installed, click

‘Finish’ to complete the wizard, and wait for the ‘Found

New Hardware Wizard’ to appear again.

This second wizard will guide you through the ‘USB Serial

Port’ driver installation.

6. Follow steps 1 to 5 above for the ‘USB Serial Port’

driver installation and click ‘Finish’ to complete.

‘Your new hardware is installed and ready to use’

will appear in the bottom right corner of your screen

when the installation is complete. See the USB Driver

Conguration section for details on how to nd out which

COM port number has been allocated to your Actisense

device as well as how to change to a different COM port

and congure the Baud rate.