Installation guide

432-0007-00-28-en-US v100 Integration with NMEA Devices – Application Note
An alternative solution allows provides the same type of connectivity and combines the Serial Ethernet
server and the NMEA Multiplexer into a single device. The ShipModul MiniPlex-2E operates on 12-24VDC
rather than PoE, and can connect up to 4 NMEA talkers.
Connect the ShipModul mux to power and to the switch. Use the MPX-Config tool that comes with the
device to search the network and locate the device. Then change the IP address to one that is compatible
with the camera and other equipment. In this example, the ShipModul mux uses 192.168.250.94.
ShipModul configuration?