Specifications

Rev. 1.43
User's Guide
23
3.1. Push Button: BP1
In the front panel, the push button generates a Power-On Reset to the board.
This button is debounced.
Figure 5: Push button location

Before SN:10135, the Push Button was generating a Hardware Reset instead of
Power-On Reset.
3.2. Rotary switch: SW1
The eight position rotary switch is a facility provided for user purposes.
This switch can be used, for example, to select the board working modes.
It can be read with the SWPR register.
Figure 6: Rotary switch location
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com