Specifications

VSBC-6862 Rev 1.43
122
LAN-15
MIL-STD-1553 Bus controller (BC), Remote terminal (RT), and Bus monitor (MT)
with 64K x 16 bit of RAM (to support complex MT or BC applications), compatible
with other IP using the DDC ACE controller
LAN-200
Fast Ethernet™ IEEE802.3u Controller with on-board 128 KBytes Fast SRAM
buffer, 8 and 32 MHz compatible, DMA transferts supported, on-board 10BASE-T
and 100BASE-TX transceivers. Price include LN-200 transition module
OUT-16
16 Isolated Digital Output (12-24V) up to 100 mA output current, three 16-bit timers,
2500 V isolation, differential output for active low or high signal
RDC-20/2x
Two channels resolver/synchro-resolver to digital converter, 10 to 16-bit resolution,
2 V RMS, 50 Hz to 10 KHz excitation, Master/Vernier, Coarse/Fine, Gimbal
assembly, include transition module
SCC-04AC
Quad RS232 Serial Interface, Sync. up to 2 MBaud, Async. up to 38.4 KBaud, 8
Bytes Rx FIFO, 4 Bytes Tx FIFO, Z85230 enhanced controller, include TxClk &
RxClk signals
SCC-04B
Quad RS422 and RS485 Serial Interface, Sync. up to 2 MBaud, Async. up to 38.4
KBaud, 8 Bytes Rx FIFO, 4 Bytes Tx FIFO, Z85230 enhanced controller
SCC-04TTL
Quad TTL Serial Interface with Data, Clock and modem control signals. Sync. up to
2 MBaud, Async. up to 38.4 KBaud, 8 Bytes Rx FIFO, 4 Bytes Tx FIFO, Z85230
enhanced controller
SCC-08A
Octal RS232 Async Serial Interface (SC26C198) up to 115.2 KBaud, 16 Bytes
FIFO on each transmit & receive channel
SCC-08B
Octal RS422 and RS485 Async Serial Interface (SC26C198) up to 460.8 KBaud,
16 Bytes FIFO on each transmit & receive channel
UCC-08A
Octal RS232 Synchronous up to 10 Mbit/sec., Asynchrone Serial Interface up to
115.2 KBit/sec., 64 Bytes FIFO on each transmit & receive channels
UCC-08B
Octal RS422 and RS485 Synchronous up to 10 Mbit/sec., Asynchrone Serial
Interface up to 2 Mbit/sec., 64 Bytes FIFO on each transmit & receive channels
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com