Specifications

Rev. 1.43
User's Guide
121
11
Hardware available
One of the main advantage of the VSBC-6862 is his versatility. Through its
IP and/or VME slots, the VSBC-6862 can be used in quantities of
purposes.
Here follows the customization possibilites with ACTIS's modules:
11.1. List of ACTIS's IP modules
The VSBC-6862 can expand his functions by the mean of the IP modules.
Up to four IP modules can be plugged on this board.
A choice of these modules is available by ACTIS Computer, and the most used are described above.
Reference Description
ADA-08
8 single ended (or 4 differential) channels, 12-bit A/D Converter ±10 V, 140
KSample/sec, burst mode, 8 channels 12-bit D/A Converter ± 10 V, 35 µs settling
time, with calibration table, two 8-bit TTL ports with 4-bit handshaking, and two
16-bit timers
ADC-08
8 channels 12-bit, Analog/Digital Converter ±5V, ±10V, 0-10V, 140 KSample/sec,
burst mode, level monitoring, watchdog
ADC-16
16 channels 12-bit, Analog/Digital Converter ±5V, ±10V, 0-10V, programmable
amplifier x1, x10, x100, 140 KSample/sec
DAC-08B
8 channels 14-bit, Digital/Analog Converter ±5V, ±10V, 0-10V, 35 µs settling time,
with calibration table
CIO-32
Quad channels 8-bit port (with handshake) TTL Input/Output Interface (total 40 TTL
I/O lines) and six 16-bit timers
INP-16
16 Isolated Digital Input (5 mA @ 12V, 10 mA @ 24V), three 16-bit timers, 2500 V
isolation, flexible pattern-recognition, interrupt generation
LAN-10B
LAN-10B Ethernet™ Controller with on-board 64 KBytes SRAM buffer
(sophisticated buffer management improve performance over traditional solutions)
including transition module with 10BASE-T (RJ45 for twisted pair), and AUI
port
LAN-12A
Arcnet ® Controller with 2 KBytes SRAM buffer, automatic ID selection, up to 2.5
Mbits/sec. Transition module for LAN-12A with coax and RJ-45 included
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com