Specifications

Rev. 1.43
User's Guide
119
pflash
Function : Program flash memory
Syntax : pflash <source> <count> <destination>
Options : <source> - starting source address
<count> - number of bytes to program
<destination> - starting destination address
reset
Function : Provide an hardware reset
Syntax : reset
sload
Function : Load binary from serial port
Syntax : sload [ <device> [ <offset> ] ]
Options : <device> - loading device and protocol
- '0' to download binary without protocol
- '1' to download Motorola S-Record (default)
<offset> - loading offset
time
Function : Get or set the time-keeper
Syntax : time [ <date & time> ]
Options : <date & time> - time-keeper value (YYYYMMDDHHMMSS)
vpd
Function : Display the Vital Product Data
Syntax : vpd
10.2.2. Advanced information
Preliminary information.
This chapter will describe the resources used for the monitor.
If the user will use ECMon with his application, he must care not to modify the following resources
used internally by ECMon:
Mapping: IMMR 0xFFF00000
internal DPRAM 0x0000-0100 SMC1 variables for console port
internal DPRAM 0x1000-1200 ECMon's variables
CS0 0xFE000000 Flash 0 First 128k used for ECMon
CS1 0x00000000 SDRAM
CS2 0xFC000000 Flash 1
CS3 0xFA100000 RTC
CS4 0xFA000000 Internal registers & IP ID+IO
CS5 0xC0000000 IP mem
CS6 0xD0000000 VME master 1
CS7 0xE0000000 VME master 2
CS9 0xFB000000 SRAM
Baud Rate Generator used for SMC1: BRG7
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com