User Manual Uživatelský Manuál Actis 7 1
Thank you for purchasing Actis 7. ▪ The Actis 7 Owner’s Manual is for your convenience and safety when using this product. ▪ Before operating Actis 7, and to take full advantage of this multi-functional navigation system, please read the manual carefully and follow its instructions. ▪ Depending on the navigation system model type, the contents of this owner’s manual may vary.
Table of Contents 1. GETTING STARTED.......................................................................................4 COMPONENTS (DEFAULT+OPTION).............................................................4 DESCRIPTION OF EXTERNAL APPEARANCE OF ACTIS 7..................................5 INSTALLING ACTIS 7 IN YOUR VEHICLE......................................................8 TAKING OUT MEMORY CARD...................................................................9 TURNING POWER ON.........
1.
External Appearance of Actis 7 ① ① ② ③ (Front View) (Front side information) Front Keys 1 2 Remote control <> Power To turn off LCD and sound. Press again to turn on LCD and sound turn.
① ② ③ ④ ⑤ 1 GPS Antenna 2 External GPS Connection Terminal 3 Speaker (Rear Side Information) Receives GPS signal from satellite. In order to make reception efficiency better, you should maintain the antenna horizontal to the sky. External connection in order to improve reception efficiency of GPS. - For vehicles with tinted windshield, truck or bus. *sold separately Voice guidance and audio output.
⑤ ① ⑥ ② ⑦ ③ ⑧ ④ ⑨ 1 (Side Information) SD/MMC memory card 2 Memory Card Slot AV In 1 3 AV In 2 4 Earphone Jack Earphone connection jack 5 Reset Button Restart system when there is system error during usage.
Installing Actis 7 in Your Vehicle 1 2 3 4 5 Press the suction cup against windscreen Push and connect the projection B of cradle into A until securely fixed Turn “C” in clock wise for fixing the device. Turn “D” in clock wise to hold the device from releasing. After installation, make sure the device is fixed firmly and then use it. Cautions during installation of vehicle Do not install where driver’s view is blinded. Do not install in front of airbag system. Do not install dashboard.
Taking out the Memory Card Press Memory Card lightly. Turning the Power On Connect power (cigarette jack or AC adapter) to the Actis 7. After power is connected, the LED on front panel turns on and the Logo Screen is displayed. After about 10 seconds the Main Menu Screen is displayed.
Main Menu Screen The Main Menu consists of several program icons. Each program can be launched by touching the screen. If an application is already running you will be switched back to it on the screen. It supports multi-tasking, so you can listen to music while navigation is on. Navigation instructions take precedence over other sound applications. ① 1.Navigation 2.Multi Media Player 3.Image viewer 4.Configuration 5.
Additional Menu Screen ① 1. Clock 2. Text viewer 3. AV In 4. Rear camera 5. Memo 6. Calculator 7. Game 8.
2. Programs and their Basic Operation Using the Multi Media Player Execute this by pressing Multimedia Player icon in the Main Menu. It plays video and music files. 1 2 3 4 5 6 7 8 9 11 10 12 13 14 1. Mute 2. Volume Down 3. Volume Up 4. Repeat, Random 5. Main Menu 6. Close 7. Navigation 8. Screen Ratio 9. Play List 10.
11. Screen 12. Progress Bar - In audio mode it shows file information, genre and lyrics. - In video mode, it shows images (If you touch the screen it changes in full screen, and it returns to default screen once you touch again) Shows the progress time of the currently playing file. 13. Play / Pause Toggle between play and pause. 14. Stop Stop playing. 15. Fast Rewind Rewind current file 16. Fast Forward Fast forward 17. Previous Go to the previous file. 18. Next Skip to the next file. 19.
Press the “Play List” button to show play list. ⑤ ⑥ ⑦ ⑧ ⑩ ② ⑨ ① ③ ④ 1. File List 2. File Scroll Bar 3. Add/Remove Folder Select files or folders Scroll files Add or remove all files in the current folder to the play list 4. Add/Remove files Remove all files fold Add list all files in folder Add or remove filesinselected to play 5. Upper 6. Mute 7. Save 8. Play Screen 9. Scroll bar 10.
Full Screen In full screen, there are unseen buttons as below. Volume UP Mute Return to default screen Volume Down Available File Formats Available Formats Video Files (AVI,MP4,M4A) MPEG Movie Files (MPEG,MPG,MPV,DTA) MPEG Audio Files(MP1,MP2) Ogg Vorbis Files (OGG, OGM) * Note Because of codec licensing some files may not play. How to get the best from the Movie Player In case of files using codec (avi, mpg, etc) we recommend you to convert the movie files into their optimal format as below.
Audio conversion 1. Bit rate : 64kbps 2. Sampling rate : 44KHz 3. Mode : stereo Press the close button or MENU key in front panel to close and go back to main menu. Using the Text Viewer Execute this by pressing the Text Viewer icon in the Menu. ① 1.Text viewer window 2.Zoom in 3.Zoom out 4.
Playing the Game Click the game icon in the Additional menu. This game is Freecell. ① ② ③ ④ ⑤ 1. File 2. Option 3. New game 4. Game start 5. Menu hide 6. Close ⑥ New game, Game restart, Game history, Close menus Select options for Menu Hide and Freecell Game Start new game Restart game Hide the top menu Close the game and return to main menu In order to move a card, select (touch) the card to move and touch a new location to place it.
Using the Image Viewer Launch this function by pressing Image Viewer icon picture in the Main Menu. ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩ ⑦ 1 2 3 4 Play slide show Previous image Next image Fast play 5 6 7 8 9 Stop slide show Rotate Open Play list Full screen 10 Close Show images in the play list one by one. Move to previous image in the list. Move to next image in the list. Show images in the play list 2x faster than normal Play speed. Stop showing the images. Rotate the image to 90° clockwise.
Press the Open button to select image files to display. If you select ‘All’ and then OK, the slide show begins. Filter You can set the filter for image files, TIFF, PNG, and JPEG. “All files” is set as default. Selecting If you press ‘Selecting’, you can choose multiple files. All ‘All’ selects all the files listed. OK Saves the selected file into the play list and starts the slide show. X Closes the window and returns to initial screen of the Image Viewer.
If you press the Play List button from the initial screen, the following window is displayed. File ＋ OK X Pull-down menu which includes followings: (Add Files…/Play/Delete/Delete All/Sort by Name/Up/Down/Load Playlist…/Save Playlist Adds a file to the play list. Moves to the previous file. Moves to the next file. Starts to play the selected file. Closes the window and returns to the initial screen. File Format / Codec The Image Viewer can decode JPG, TIF, and PNG formats.
Using the Clock Start this by pressing the Clock icon in the Main Menu. The current date and time are displayed acreoss the entire screen. Using the Rear Camera Connect the rear camera cable between your Rear Camera and AV-In 1 jack. To execute rear camera, press the R-CAM icon on the launcher screen. Or if you set reverse gear it launches the rear camera automatically.
Using AV-In Connect the AV cable between the AV device and AV-In 2 jack. Launch this function by pressing the AV-IN icon on the launcher screen to see the AV screen from the AV device *Note: Only the following pin type jack is supported AV Connector assignment You can see the video screen and sound supplied from to AV-IN 2 jack. If you touch the screen, the volume button, close button as shown below are ⑤ displayed.
1 Mute 2 Volume UP 3 Volume DOWN 4 Volume level bar 5 EXIT Mute sound Increase volume Decrease volume Show AV-IN volume level Close AV-IN and return to main menu Press the Menu button on the front panel or the Exit button on the screen to return to the main menu. Using Memo Launch this by pressing Memo icon in the launcher. Memos are stored in the Memo folder on the SD memory card. ② ③ ④ ⑧ ① ⑤ 1.Memo window 2.New 3.Save 4.
Using the Calculator Launch this program by pressing the Calculator icon on menu. ① ④ ⑤ ③ ⑪ ② ⑩ ⑨ ⑥ 1. Screen 2. Figure input 3. Backspace 4. CE 5. C 6. +/7. Decimal point 8. Four rules of arithmetic 9. Reciprocal 10. Percent 11.
Using Configuration This consists of 6 icons. ⑥ ① ② ③ ④ ⑤ 1.Brightness 2.Calibration 3.FMT 4.Misc. 5.System 6.Close Start the Back Light control settings. Calibrate the touch screen control. Turn on / off FMT and select a required frequency.
How to Regulate LCD Brightness ② ① 1.Backlight Control 2.Close Control the display backlight Return to configuration menu. Calibration If you feel that the touch panel is not accurate, you can calibrate it with this application.
FMT setting ④ ① ② ③ 1 FMT ON/OFF 2 FMT volume 3 FMT Frequency 4 Close Turn on and off FMT Control FMT volume Select a required FMT frequency. Return to configuration menu. *. The best frequency varies depending on the type of car. Choose a frequency best fitted to your car.
Miscellany ⑧ ① ② ③ ④ ⑤ ⑥ ⑦ 1.Button Sound 2.Start program 3.GPS reset 4.Screen saver 5.Day light saving Time If you check the check box, you can screen clicks when touching buttons. Select a start program or launcher screen Reset GPS in case GPS has a problem. Set the screen saver.
6.Language 7.Time setting 8.Close Select menu language Select your time zone. Return to the configuration menu. *note : GPS reset should be activated in the open sky after closing all programs. Wait for about 5 minutes and check the GPS signal reception on the map. System Shows version information of the embedded applications. By pressing the Close button on the screen or pressing the Menu Button on the front panel, you can return to Main Menu.
3. Additional Functions Multi Tasking Multi Tasking means that you can use several application programs simultaneously. For example, you can use Navigation and Music Player at the same time. If you want Multi Tasking for those two programs, launch one first. Then press the Menu Button on the front panel and return to the Main Menu. If you press another program’s icon, it operates together with the previous program. On screen you will see the Navigator program and sound comes from the Music Player.
4. Common Knowledge on GPS What is GPS? GPS(Global Positioning System) is a system to provide services such as position, speed and time measurement using satellite that was developed by U.S. Department of Defense. There are 24 satellites available currently as a standard. [24 satellites available] GPS can perform accurate measurement of three dimensional position, altitude and time.
where position is measured by only one receiver, so the single positioning method is being utilized mainly for navigation such as vehicle, ship, aircraft, etc. or in GIS field where allowable error is relatively big rather than for measurement. Cautions during Use of GPS 1 2 3 4 Do not dissemble, repair, or reassemble it. Avoid contact with water or liquid. Avoid shock, high temperature, high humidity, etc. Signal may be affected by the following conditions: Tree foliage.
5 Support Guide Self Check List before contacting technical support The following checklist will be helpful in solving problems encountered while using your navigation system. Before reviewing the following checklist, check the equipment connection and operation procedure. Screen is blank. Verify if power is applied to the device. Navigation does not start. Verify that the SD card containing the navigation program is inserted. GPS does not operate well.
Product Specification Division Contents CPU Monahan-PXZ-300 (624MHz) ROM 128MB NAND Flash RAM 128MB SDRAM OS MS Windows CE 5.0 LCD 7.
6. Navigation Please note that operating your PND while driving can be dangerous and we recommend that you prepare your journey in advance. Now you will be presented with an overview map of the region you have installed. Setting your navigation preferences Tap the Menu button at the top of the map screen. You will see the following menu: Tap the right arrow to access the next screen.
Tap the Settings button. Now you are in the settings menu. Tap the Navigation button. You are now in the Navigation Settings menu. Tap Autozoom to toggle the Autozoom feature on or off. Autozoom will automatically adjust the map zoom as your drive, zooming out when between manoeuvres and zooming in as you approach the next junction. Tap 3D View/Plane View to toggle between 3D and 2D maps as you drive. Tap Truck/Car to set the type of vehicle you are driving.
Tap Routing mode to select your preferred route type. Fastest - this is the default route mode. It takes your to your destination in the quickest time. Shortest - this mode calculates the route with the shortest travelling distance. Cheapest - calculates the most petrol efficient route. Pedestrian - use this mode when walking. Tap Detail nav on/off to toggle detailed navigation. Detailed navigation gives you extra instructions when going straight along a road.
menu or the map view. You are now ready to set your destination. Setting your destination You can set a destination in several ways, from the map, from the search menu or from one of your favourites. From the Map Tap the position on the map where you want to set your destination. The following menu will appear: Select the destination icon . From the Search menu Select Find & Navigate from the Main Menu or Tap the search icon in map view 38 .
There are several database types to choose from: Address, POI (Points of Interest), Favourites and Nearest. To make a change to any detail tap the textbox it is in. If you have entered search text before, you may see it on the following screen. If you begin typing the old text will be overwritten. You can also set a destination from that last search performed or from imported data. Address If you know the street (and optionally the house number) tap Address. To see a history of previous searches click .
You can type using the on-screen keyboard. As you type Navigator will automatically search for nearest matches and list them underneath. Once you see your town in the list tap it. You must now type the street you are going to (or select TOWN CENTRE). Once you see your street in the list tap it.
You will now be asked to select a house number from the ranges shown in the list. If you do not know the house number tap ANY. This will allow you to select a destination on the crossroad with another street. A list of all intersecting street will be shown. Click the right arrow. You will now be shown the following screen Now tap Navigate and your journey will be calculated.
- the routing mode (fastest, shortest, cheapest) - the car type selected. You can change any of these parameters by clicking on them. To restart your search simply click the left arrow. POI If you want to go to a point of interest tap the POI tab. To see a history of previous searches click . First select the country you want to search in. Next select the town, region or postcode area. If you want to search the entire country select ANY. Now you can select the POI type.
Now select the type of POI you are looking for. If you want to search through all points of interest tap ANY. Now type the name of the POI you are looking for. You can type using the on-screen keyboard. As you type Navigator will automatically search for nearest matches and list them underneath. The icon to the right of the name tells you what type POI is listed. Once you see your POI in the list tap it.
Now tap Navigate and your journey will be calculated.
Tap on a favourite and you will be taken to the following screen. To expand a group tap on it. Now tap Navigate and your journey will be calculated.
- the number of waypoints on the journey - the routing mode (fastest, shortest, cheapest) - the car type selected. You can change any of these parameters by clicking on them. To restart your search simply click the left arrow.
Now select the type of POI you are looking for. If you want to search through all points of interest tap ANY. You will now see the location of the closest points of interest along with their direct distance You will now be shown the following screen Now tap Navigate and your journey will be calculated.
Navigating You should now be in navigation mode. Your journey will be highlighted on the map. You will see something like or depending on whether you selected 2D or 3D mode. Instructions about your next maneuver are displayed in the opaque bar at the bottom of the screen.
Here you can deselect waypoints that you no longer want to route through by using the checkboxes on the left of the screen. On major roads navigator will often activate the lane assistant which helps you get in the right lane for the next manoeuvre. Correct lanes are shown with green dots, others as red dots. If you stray from your route Navigator will automatically recalculate your journey.
Here you can see driving instructions for the whole journey. Tap to select any entry in the itinerary. Tap the right arrow to show the following menu. Here you can select to show the select link on the map, add it to favourites or disable it from the routing engine. Once a link is disabled it will not be used in future route calculations. Tap on any navigation panel on the right of the screen to change what it displays. A screen with several option will appear. Tap one to select it.
ETA - Time in destination - the approximate time you will arrive at your destination TTM - Time to maneuver - the approximate time before your next maneuver ALT - Altitude, SPD - Speed, AZI - Course, SAT - Number of satellites, GPS Position, TIM - Time and DAT - Date give you data about your current position and the Satellite signal.
