User's Manual

Actiontec Wireless-Ready DSL Gateway

2. Plug the loose end of the Ye l l ow C a b le into the Ethernet Port on the back of

the computer.

3. Confirm that one of the four Ethernet Network Lights on the DSL Gateway

is green (this may take a few moments).

☞

Note:Ifnone of the Ethernet Network Lights glows green,

check the Yellow Cable and ensure it has been connected prop-

erly.

USB

1. Get the Purple Cable from the Purple Bag and plug one end of the Purple

Cable into the Purple Port on the back of the Gateway.