Specifications
Add-ons ReadMe Documentation 23
Requirements and Recommendations
To print to a supported printer, the JETCET PRINT Professional must be installed on a thin
client that is connected to a printer through the thin client USB port.
Important Feature Information
Wyse JETCET PRINT Professional supports the following printers:
• Hewlett-Packard Deskjet - 600, 660, 672, 680, 690, 870, 880, 895, 990cse, and 1215.
• Hewlett-Packard Deskjet - 340C Mobile, and 400.
• Hewlett-Packard LaserJet - 4L, 4P, 4MP, 4si, 1000, and 4000.
• Hewlett-Packard LaserJet - 5L, 5P, 5MP, and 5si.
• Hewlett-Packard LaserJet - 6L, and 6P.
• Epson Stylus Color - 400, 600, 740, 777, 800, 900, and 980.
• Epson Stylus Photo - Photo, Photo 700, and Photo 875.
• Canon BubbleJet - BJC-250, 1000, 2000, 3000, 4000, and 4400.
• Canon BubbleJet - BJC-30, BJC-50, and BJC-80.
• Pentax - PocketJet and PocketJet II
• Citizen - PN60i
• Lexmark - Z53
Magic USB MGCOM
Wyse Magic USB MGCOM provides driver support for the various USB-Serial dongles on
supported Winterm™ 3 series hardware. Use the Ports application (located in the Control
Panel) to configure the USB-to-Serial device settings.
About the Add-on
Supported H/W:
• Wyse USB-to-Serial Port Converter Cable part number 920207-01
• Wyse USB-to-Parallel Port Converter Cable part number 920207-02
• MCT U232-P9 USB-RS232 Converter (9 pin)
• MCT U232-P25 USB-RS232 Converter (25 pin)
Requirements and Recommendations
Wyse Magic USB MGCOM requires a Winterm™ 3 series Thin Client with at least one
available USB port.
Due to the dynamic loading characteristics of USB devices, a USB-Serial dongle can
occupy different COM port numbers depending on what other USB-Serial devices are
attached, the plug-in order among the attached USB devices, or the USB port to which the
devices are attached. Applications which are configured to use certain COM port numbers
may need to be re-configured due to COM port number changes for a USB-Serial dongle.
To avoid COM port number changes for a USB-Serial dongle, be sure to plug in the same
number of USB-Serial devices to the same USB ports before booting the thin client.