Specifications

Add-ons ReadMe Documentation 19
ELO Touch Screen
Wyse ELO Touch Screen allows Winterm™ 3 series Thin Client users to make a selection
by touching the monitor screen, rather than typing on a keyboard or pointing with a mouse.
After a touch screen is attached through a standard USB or Serial port, you can configure
and calibrate the touch screen by using the Touch Screen icon in the Control Panel.
Note
On CE .NET 4.2, Wyse ELO Touch Serial is incompatible with MicroTouch.
Ensure that the MicroTouch Add-on is removed before installing ELO Touch
Serial. Installing both Add-ons causes unpredictable malfunctions.
Notable Features
Wyse ELO Touch Screen USB supports the following devices:
• All ELO Touch USB models
• CarrollTouch Infrared (all 4000 series controllers)
Requirements and Recommendations
Wyse ELO Touch Screen requirements and recommendations include the following:
• Winterm™ 3 series Thin Client with at least one available USB or Serial port.
• ELO Touch Screen monitor.
• Some Touch screen add-ons, including EloTouch, EloTouchUSB, EloTouchUSB410,
and the MicroTouch Add-on are not compatible. It is recommended that before
installing a Touch screen add-on, you uninstall all existing Touch screen add-ons from
the thin client. With CE 4.1 and later, the removal and installation of add-ons can be
done without rebooting. You do not need to uninstall existing Touch screen add-ons
when performing an upgrade on that add-on.
Important Feature Information
Wyse ELO Touch Screen USB supports CarrollTouch Infrared (all 4000 series controllers)
and all ELO Touch USB models including the following devices:
• ELO LCD Desktop 15 inch Touchmonitor (XGA TFT color display)
• ELO Entuitive 15 inch Touchmonitor with AccuTouch Five-Wire Technology
(ET1525C-7UWD-1)
• ELO Entuitive 15 inch Touchmonitor with IntelliTouch Surface Wave Technology
(ETC1525C-8UWD-1)