Specifications

4 Add-ons ReadMe Documentation
This section provides detailed information on the Add-ons Winterm™ 3 series Thin
Clients.
Overview
Before you install an Add-on, be sure that you have addressed all pre-installation issues
discussed in “Before You Begin Installing the Add-ons” on page 3.
The Add-ons use the CE .NET 4.0 operating system or later. Before you install an Add-on,
ensure that the CE .NET version that you are currently running is CE .NET version 4.0 or
later. In addition, refer to Table 1 “Add-on support for Winterm™ 3 series Thin Clients” to
ensure that the Add-on you want to install is compatible with the CE .NET version that you
are currently running (required Add-on build numbers are listed under each version). If the
Add-on you want to install is not compatible with the CE .NET version that you are
currently running, refer to the upgrade documentation for your CE .NET version.
Detailed information for each of the Add-ons are found in the sub-sections that pertain to
that Add-on.
Note
For information on an Add-on version not listed in Table 1, refer to the
Add-on documentation released for that Add-on version.